Mechanical Instructions
EN 22
Q552.2L LA
4.
2012-Mar-16
back to
div. table
Figure 4-24 LCD panel [3/3]
4.5
Assy/Panel Removal Sundance Styling
(xxPFL8xxx/xx series)
The instructions apply to the 32PFL7406K/02 - European
model.
4.5.1
Rear Cover
Warning: Disconnect the mains power cord before you remove
the rear cover.
Note: it is not necessary to remove the stand while removing
the rear cover.
1.
Remove all screws of the rear cover.
2.
Lift the rear cover from the TV. Make sure that wires and
flat coils are not damaged while lifting the rear cover from
the set.
4.5.2
Speakers
Tweeters
Each tweeter unit is mounted with one screw.
When defective, replace the whole unit.
Subwoofer
The central subwoofer is located in the centre of the set and is
secured by two bosses.
When defective, replace the whole unit.
4.5.3
Mains Switch
Refer to
Figure 4-25
for details.
Figure 4-25 Mains switch
The mains switch is mounted on a plastic subframe and can be
removed without removing the subframe.
1.
Use a screwdriver and push the switch out of its casing [1].
2.
Unplug the connectors.
When defective, replace the whole unit.
4.5.4
Main Power Supply
Refer to
Figure 4-26
for details.
Figure 4-26 Main Power Supply
1.
Unplug all connectors [1].
2.
Remove the fixation screws [2].
3.
Take the board out.
When defective, replace the whole unit.
19101_003_110407.eps
110407
4
19100_047_110216.eps
110216
1
19100_050_110216.eps
110216
1
1
1
2
2
2
2
