Philips 32PFL6XX7, User Manual

Page: 21 / 68

Shift
To type an uppercase character, press and hold the (
(Shift) key ( 2 ) and type the uppercase character you need. If
you only need 1 uppercase character in your text, press the
( key just before typing the character you need.
If you need to type several uppercase characters consecutively,
you can hold the
(
key while typing or press the
(
key
for 2 seconds to switch the keyboard in uppercase mode.
Press the
(
key once to switch out of the uppercase mode
again. If you do not press any character on the keyboard, the
uppercase mode switches off automatically after 20 seconds.
Also, if you press any other modifier key on the keyboard, like
Fn (3)
or the
àö ! (4)
key, you switch out of the uppercase
mode.
Alternative characters
To type an alternative character (the coloured characters on
the keyboard) press and hold the Fn key ( 3 ) and type the
alternative character you need. You can switch to or back out
of the alternative character mode as you do for the uppercase
mode.
Special characters - àö !
Some characters have no key on the remote control keyboard.
To enter special characters, you can open the onscreen
keyboard.
To open the onscreen keyboard, press àö ! ( 4 ). In the
onscreen keyboard, you can navigate to the character you need.
Switch the keyboard lay-out with the colour keys. Press OK to
enter a character. The onscreen keyboard disappears when you
press a character on the remote control keyboard.
Alternatively, you can enter special characters with the remote
control SMS/text keypad on the front of the remote control.
Email and Internet
You can use the
Fn
key to enter the characters for email and
Internet use, like @, # or www. and .com.
Keyboard overview
1 - Fn
key
Hold the Fn key to type an alternative, coloured character.
2 - ( Shift
Hold the Shift key to type uppercase characters.
3 - y
Spacebar key
4 - Arrow
keys
5 - Enter
Press Enter to confirm the text you entered.
6 - Backspace
Deletes the character in front of the text cursor.
7 - àö ! Special character key
Press àö ! to open the onscreen keyboard to select a special
character.
8 -AZERTY character key
Character if the keyboard lay-out is set to AZERTY .
Qwerty or Azerty
The standard layout of the remote control keyboard is
QWERTY.
You can also set the keyboard layout to AZERTY.
To change the keyboard layout, press h and select S Setup
and press
OK
to open the Setup menu.
Select
TV settings
>
General settings
>
Remote control
keyboard .
Select
QWERTY
or
AZERTY
.
The AZERTY characters are indicated at the top right of the
relevant keys.
IR Sensor
The remote control of the TV uses RF (radio frequency) to
send its commands to the TV. With RF, you do not need to
point the remote control at the TV.
However, the TV can also receive commands from a remote
control that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point the remote
control at the infrared sensor on the front of the TV.
Pairing
This remote control uses radio frequency (RF) to send its
commands to the TV. Opposite to remote controls using
infrared signals, with this remote control you can send
commands without pointing at the TV.
TV / Remote control 21