Current version
You can check the current version of the TV software with
Current version
.
Copy channel list
Copy a channel list
1 -
Switch on the TV which has its channels installed. Plug in a
USB memory device.
2 -
Press
h
, select
S
Setup
and press
OK
.
3 -
Select
TV settings
>
General settings
>
Channel list copy
>
Copy to USB
and press
OK
. To copy the channel list from
this TV, you might be asked to enter the Child lock code you
entered during the installation.
4 -
When copying is done, unplug the USB memory device.
Now you can upload the copied channel list onto another
Philips TV.
Upload channel list
Upload a copied channel list
Depending on whether your TV is already installed or not, you
must use a different way to upload a channel list.
To a TV that is not yet installed
1 -
Plug in the power plug to start the installation and select
language and country. You can skip Search for channels. Finish
the installation.
2 -
Plug in the USB memory device that holds the channel list
of the other TV.
3 -
To start the channel list upload, press
h
, select
S
Setup
and press
OK
.
4 -
Select
TV settings
>
General settings
>
Channel list copy
>
Copy to TV
and press
OK
. You might be asked to enter
the Child lock code of this TV.
5 -
The TV notifies you if the channel list is copied to the TV
successfully. Unplug the USB memory device.
To an already installed TV
1 -
Verify the country setting of the TV. (To verify this setting,
press
h
, select
S
Setup
and press
OK
. Select
Search for
channels
>
Reinstall channels
and press
OK
. Press
b
and
later
Cancel
to leave the Search for channels.)
If the country is correct continue with step 2.
If the country is not correct, you need to start a reinstallation.
To start the reinstallation, press
h
, select
S
Setup
and
press
OK
. Select
Search for channels
>
Reinstall channels
>
OK
. Select the correct country and skip the Search for
channels. Finish the installation. When done, return to step 2.
2 -
Plug in the USB memory device that holds the channel list
of the other TV.
3 -
To start the channel list upload, press
h
, select
S
Setup
and press
OK
.
4 -
Select
TV settings
>
General settings
>
Channel list copy
>
Copy to TV
and press
OK
. You might be asked to enter
the Child lock code of this TV.
5 -
The TV notifies you if the channel list is copied to the TV
successfully. Unplug the USB memory device.
DVB-T or DVB-C
If both DVB-T and DVB-C reception is available in your country
and if this TV is ready to receive DVB-T and DVB-C for your
country, you have selected one or the other during the channel
installation.
If you want to change the DVB setting to start a new channel
installation, press
h
, select
S
Setup
and press
OK
.
Select
Channel settings
and press
OK
.
Select
Channel installation
>
Antenna connection
>
Antenna
or
Cable (DVB-C)
and press
OK
. Select the DVB setting you
want.
DVB-C channel installation
For ease of use, all DVB-C settings are set to automatic.
If your DVB-C provider gave you specific DVB-C values, the
network ID or network frequency, enter these values when the
TV asks for them during installation.
It might be necessary to adjust the scanning (full or quick scan)
or enter a specific symbol rate in the
Settings
menu while
installing. To set a
Symbol rate
, first set the Symbol rate to
Manual
.
Channel number conflicts
In some countries, different TV channels (broadcasters) might
have the same channel number. While installing, the TV
shows the list with channel number conflicts. You need to
select which TV channel you want to install on a channel
number with multiple TV channels.
DVB-T + DVB-C
If you can use a DVB-T antenna input but also a DVB-C input,
you can set up your TV for both DVB-T and DVB-C. Install one
system followed by the other with the necessary settings.
Once each system is installed, you need to switch the antenna
input signal on the
Antenna
connection on the back of the TV
and set the TV in the appropriate system to view the installed
channels on TV.
To select the DVB-T or DVB-C setting, see above.
Reception quality
If you receive digital channels, you can check the quality and
signal strength of a channel.
If you have your own antenna, you can reposition the antenna
to try and improve the reception.
To check the reception quality of a digital channel, switch to
the channel.
Press
h
, select
S
Setup
and press
OK
.
Select
Channel settings
and press
OK
. Select
Channel
installation
>
Digital : reception test
and press
OK
.
The digital frequency is shown for this channel. If the reception
is poor, you can reposition your antenna. To check the signal
quality of this frequency again, select
Search
and press
OK
.
To enter a specific digital frequency yourself, use the remote
control digit keys. Alternatively, select the frequency, position
the arrows on a number with
w
and
x
and change the number
with
u
and
v
. To check the frequency, select
Search
and
press
OK
.
If you use DVB-C to receive channels, the options
Symbol rate
mode
and
Predefined symbol rates
are available. For Symbol
rate mode, select
Automatic
, unless your cable provider gave
you a specific symbol rate value. To enter the symbol rate
value, use the number keys.
Manual installation
Analogue TV channels can be manually installed, channel by
channel.
TV / Watch TV
23
