EN 34
Select speaker output
If a connected device is HDMI CEC
compliant, you can output TV audio through
an HDMI cable. Additional audio cables are
not required. Make sure that you connect
the device to the HDMI connector on the
TV. See
Connect your TV > About cables
> HDMI (Page 45).
Configure TV speakers
1. Press .
2. Select
[Setup]
>
[TV settings]
>
[EasyLink]
>
[TV speakers]
.
3. Select an option, then press
OK
:
[Off]
: Switch off TV speakers.
[On]
: Switch on TV speakers.
[EasyLink]
: Stream TV audio through
the connected HDMI-CEC device.
Switch the TV audio to the connected
HDMI-CEC audio device through the
Adjust menu.
[EasyLink autostart]
: Turn off TV
speakers automatically and stream TV
audio to the connected HDMI-CEC
audio device.
Select speaker output with the adjust menu
If
[EasyLink]
or
[EasyLink autostart]
are
selected, you can access the Adjust menu to
switch the TV audio.
1. While you watch TV, press
ADJUST
.
2. Select
[Speakers]
, then press
OK
.
3. Select one of the following, then press
OK
:
[TV]
: On by default.
Stream TV audio through TV and the
connected HDMI-CEC audio device
until the connected device switches to
system audio control. TV audio is then
streamed through the connected
device.
[Amplifier]
: Stream audio through the
connected HDMI-CEC device. If system
audio mode is not enabled on the
device, audio continues to stream from
the TV speakers. If
[EasyLink autostart]
was selected, the TV prompts the
connected device to switch to system
audio mode.
With HDMI ARC compliant device
If an HDMI-ARC compliant device is
connected through the HDMI ARC
connector to the TV, you can output TV
audio through the HDMI cable. You will not
need an additional audio cable.
1. Press .
2. Select
[Setup]
>
[TV settings]
>
[EasyLink]
.
3. Select
[HDMI 1 - ARC]
.
4. Select one of the following, then press
OK
.
[On]
: Hear the TV audio through the
connected ARC compliant device.
[Off]
: Hear the TV audio through the
TV speakers, or through a device
connected through the digital audio out
connector.
5. Control playback with the TV remote
control play buttons.
Synchronise audio
If your TV is connected to a home theatre
system (HTS) and there is a lag between the
picture and the sound, you can synchronise
them.
If you are using a Philips HTS, the audio
and video are automatically
synchronised.
For other HTS brands, you need to
switch on the audio sync delay on the
TV to synchronise the audio and video.
Switch on Audio Out Delay
1. Press .
2. Select
[Setup]
>
[TV settings]
>
[Preferences]
.
3. Select
[Audio Out delay]
>
[On]
, then
press
OK
.
Retain picture quality
If your TV picture quality is affected by the
picture-processing features of other devices,
you can switch on Pixel Plus Link.
Switch on Pixel Plus Link
1. Press .
2. Select
[Setup]
>
[TV settings]
>
[EasyLink]
.
3. Select
[Pixel Plus link]
>
[On]
, then press
OK
.