2005 HF Series User’s Manual
112505.0959
10
CHANNEL INSTALL
(>)
The CHANNEL INSTALL menu allows the user to configure the channels that can be
accessed. When installing the channels, different inputs can be mapped to TV channels to
allow seamless integration into the channel map. The two sections below explain how to
install analog channels and AV inputs, and how to install digital channels.
Installing Analog channels
When selected, CHANNEL INSTALL menu appears as follows. Configure the inputs
and channels as described.
CHANNEL INSTALL
CHANNEL
TV 1– 125
SOURCE
ANALOG/DIGITAL / AV 1 / AV 2 /HDMI 1/HDMI 2/SIDE AV
RING
SAVED
LABEL
( ) >
AUTO INSTALL TV
>
•
CHANNEL:
Select the channel you wish to configure.
•
SOURCE:
Select the input source that you wish to associate with the specified CHANNEL. This
feature enables you to “map” (re-assign) a numeric channel number to a video input,
rather than to its normal RF TV channel (i.e. ANALOG). In other words, TV channel
2 could be used to select the AV 1 video input instead of RF (ANALOG) channel 2.
Special instructions for mapping digital channels are included below.
•
RING:
Specify whether the current channel or input is to be SAVED to or DELETED from
the cha nnel ring (i.e., list of channels available for selection by means of a standard
guest remote control).
•
LABEL:
Input a maximum of 8 characters for the channel’s label. Cursor to the right to start
the first character. Cursor left or right to navigate between character positions within
the label field. Cursor up or down to select characters from the list: A to Z, 0 to 9, -, .,
/, :, =, ?, ;, <, >, @ or space. To edit, re- input the character at its position. To exit,
press “M” to navigate out of the label editing field.
•
AUTO INSTALL TV:
When AUTO INSTALL TV is selected, the TV performs an automatic search for the
presence of viable RF analog signals at its tuner input. Channels 1 through 125 will
be checked. When a viable signal is detected on a given channel, that channel is
added to the channel ring. Any command from a remote control terminates the AUTO
PROGRAM session.
