18
Using Your Hub
Alternate Configuration for Wired Devices
Most devices will connect wirelessly. The following
directions apply only if your device is not wireless and was
provided with a USB cable.
There is a USB port (type A) on the bottom side of the
2net Hub to connect 2net-approved USB-capable medical
devices to the Hub.
i
w
The USB port is not for charging USB devices.
To collect data from a USB-capable medical device:
1.
Confirm that both the sending light and reading light
on your Hub are
solid GREEN
.
2.
Take a reading on your medical device.
3.
Connect your medical device to the Hub using the USB
cable supplied with your medical device.
▫
Your Hub should automatically receive data from your
medical device. If not, your medical device might have
a “transmit” button or function that you may need
to activate to transmit data. Follow the instructions
provided in the user manual for your medical device.
▫
The Hub’s reading light
s
flashes GREEN
while
medical data is being received.
▫
The Hub’s reading light
s
turns
solid BLUE
when your
data has been successfully received.
