Philips 29PT6961 Instructions For Use Manual Download

Page: 6 / 54

REPARATION

Positioning of the TV set

• Place your TV set on a solid base, strong enough to

withstand the weight of the set.

• Leave a space of at least 5 cm around each side of the

TV set to allow for proper ventilation.

• Do not place TV set near a radiator or other sources of

heat.

• Do not place TV set where it can be exposed to rain or

excesssive moisture.

Connecting the Aerial

• Insert the aerial plug into the socket

at the rear of

the set.

Connecting to the mains

• Insert the mains plug into the wall socket. (For correct

mains voltage, refer to the type sticker at the rear of the
set).

Note

: This diagram is not representative of the actual

plug and socket.

Using the Remote Control

• Insert the correct type of batteries into the compartment.
• Ensure the batteries are placed in the right direction.

Note

: Remove the batteries from the remote

control handset if handset is not used for a long time.

Switching on the TV set

• Press the mains power button to switch on/off the TV set.
• If the set is on standby mode (indicator light is red), press

the Standby button on the remote control to switch on set.

5 cm

Summary of Contents for 29PT6961























































Search results

Summary of Contents for 29PT6961

Reviews:

Related manuals for 29PT6961

Brands by name

Popular brands

Philips 29PT6961, Instructions For Use Manual

Search results

Summary of Contents for 29PT6961

Reviews:

Related manuals for 29PT6961

Brands by name

Popular brands