Philips 28PW9618, User Manual

Page: 27 / 32

23
CENTRE IN CENTRE IN CENTRE IN
AUDIO
OUT
DIGITAL
AUDIO
OUT
CENTRE IN
CENTRE IN
AUDIO
OUT
Although your TV is already equipped with a Digital
MultiChannel decoder you might want to connect your own
MultiChannel surround receiver.
See the separate supplied Cinema Link instruction manual.
Attention: the sound info on screen will not correspond with the actual sound reproduction.
Press the
v
key on the remote control repeatedly to select
EXT1
,
EXT2
,
EXT3
,
EXT4
or
SIDE
according to where you connected your equipment at the back or the right side of your TV.
Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
To select connected equipment
Cinema Link Surround receiver
Recorder or DVD with EasyLink
The recorder (VCR or DVD+ RW or DVD can be
operated with the remote control via the
Recorder or
DVD
menu on screen.
&
Press the
MENU
key on the remote control.
é Select the
Recorder
or
DVD
menu with the
cursor up/down.
“ Press the cursor left/right, up/down to select
one of the recorder or DVD functions.
The key
®
for recording can be operated in the TV
mode.
If your EasyLink recorder has the system standby
function, when you press the
B
key for 3 seconds,
both TV and the recorder are switched to standby.
Ò p ‡ π † ®
Ï
Rwd Play Stop Play Ffw Rec Eject
Recorder
Ò p ‡ π †
Ï
Prev. Play Stop Play Next Eject
DVD
Connect audio receiver
MultiChannel surround receiver with or without digital
input connectors
&
Connect a MultiChannel surround receiver to the
AUDIO OUT
R
and
L
connectors at the back of your TV.
é
If you want the loudspeakers of your TV to act as centre
speaker, also connect an audiocable to the MultiChannel
surround receiver
CENTRE OUT
connector and to the
CENTRE IN
connector at the back of your TV.
“
Select Centre input On in the Source menu. See p. 11.The
loudspeakers of the TV will now only produce centre sound.
‘
If necessary, adjust the volume level of the centre sound in the
Centre in volume
menu item of the Source menu.The overall
volume has to be controlled via the MultiChannel surround
receiver.
( In case of a Digital MultiChannel surround receiver, also connect
the receiver to the digital audio out connector.
In this case the loudspeakers of your TV cannot act as centre
speaker. Select
Centre input Off in the Source menu, see p. 11.
Also see the instructions manual of your Digital MultiChannel
surround receiver.
2209.1 gb 11-02-2003 10:17 Pagina 23