21
There is a wide range of audio and video equipment that can be connected to your TV.
The following connection diagrams show you how to connect them.
Note:
EXT.1
can handle CVBS and RGB,
EXT.2
CVBS, RGB and Y/C,
EXT.3
and
EXT.4
only CVBS.
It is preferred to connect peripherals with RGB output to
EXT.1
or
EXT.2
as RGB provides a better picture quality.
If your recorder is provided with the EasyLink function, it should be connected to
EXT.2
to benefit from the EasyLink
functionality.
Recorder (
VCR
-
DVD
+
RW
)
Connect the aerial cables
1
,
2
and, to obtain the optimum
picture quality, eurocable
3
as shown.
If your recorder does not have a euroconnector, the only possible
connection is via the aerial cable.You will therefore need to tune in
your recorder’s test signal and assign it programme number 0 or
store the test signal under a programme number between 90 and
99, see Manual installation, p. 6..
See the handbook of your recorder.
Decoder and Recorder
Connect a eurocable
4
to your decoder and to the special
euroconnector of your recorder. See also the recorder handbook.
See Decoder, p. 11. You can also connect your decoder directly to
EXT. 1
or
2
with a eurocable.
Other equipment
(except digital sources)
&
Connect the aerial cables
1
,
2
and
3
as shown (only if
your peripheral has TV aerial in-/output).
Better picture quality can be obtained if you also connect
eurocable
5
to
EXT. 2
and a eurocable
4
to
EXT. 1
,
3
or
4
.
é
Look for the test signal of your peripheral in the same way as
you do for a recorder.
When a recorder is connected to
EXT.1
you can only record a
programme from your TV. Only when a recorder is connected to
EXT.2
it is possible to record a programme from your TV as well as from
other connected equipment.
Digital equipment
(DVD, Digital Set Top Box, ...)
&
Connect your digital equipment with a eurocable
1
to one of
the euroconnectors (
EXT 1
,
2
,
3
or
4
), or with a cinch cable to
the video input at the right side of the TV.
é
To enjoy Multichannel surround sound from digital sources with
a Dolby Digital audio output also connect an audio cable
2
to
one of the two digital audio in sockets of your TV. Make a
selection in the Setup, Source menu, p. 11.
“
According to the connected digital equipment, select
REC
,
DVD
,
SAT
,
Game
or
Digital STB
in the Setup/Source menu.
See p. 11.
2
EXT.
EXT.
2
EXT.
CABLE
1
4
2
3
1/2
1/2
EXT.
EXT.
1/2
EXT.
CABLE
1
2
3
5
4
1/2/3/4
EXTERNAL
1
2
DIGITAL
AUDIO IN
Connect Peripheral Equipment
2209.1 gb 11-02-2003 10:17 Pagina 21
