8
Timer function
Locking the set
This menu allows you to use your TV as an
alarm clock.
&
Press
H
.
é
Select FEATURES (
J
) and press
L
twice.
The TIMER menu appears :
“
Press
L
to enter and exit the sub-menus and
use keys
IJ
to adjust:
‘
TIME: enter current time.
Note: the time is updated automatically each time
the set is switched on using teletext information
taken from programme 1. If programme 1 does
not have teletext, the update will not take place.
(
START TIME: enter the start time.
§
STOP TIME: enter the stop time.
è
PROG; NO;: enter the number of the
programme required.
!
ACTIVATE: you can set the alarm to be
activated:
• ONCE ONLY for a one-off alarm,
• DAILY for a daily alarm or
• STOP to cancel.
ç
Press
R
to set the TV to standby. It will
automatically switch on at the time
programmed. If you leave the TV switched on,
it will only change programme at the time
indicated.
You can bar access to certain programmes or
completely lock the set by locking the keys.
Locking programmes
&
Press
H
.
é
Select FEATURES (
J
) and press
L
.
“
Select PARENTAL. CONT. (
J
) and press
L
.
‘
Enter your confidential access code.The first
time, enter the code 0711 then confirm by
re-entering 0711.The menu appears.
(
Press
L
to go into the menu.
§
Use keys
IJ
to select the required
programme and confirm with
L
.The symbol
+
is displayed alongside the programmes or
sockets that have been locked.
è
Press
R
to exit.
To watch a programme which has been locked
you will now need to enter the confidential
code; otherwise the screen will remain blank.
The INSTALL menu access is also locked.
Caution: in the case of encrypted programmes
which use an external decoder, it is necessary to
lock the corresponding EXT socket.
To unlock all programmes
Repeat stages
&
to
‘
above, then select
CLEAR ALL and press
L
.
To change the confidential code
Repeat stages
&
to
‘
above, then:
(
Select CHANGE CODE and enter your own
4-digit number.
§
Confirm by entering it again.
Your new code will be stored.
è
Press
R
to exit from the menus.
If you have forgotten your confidential code, enter
the universal code 0711 twice.
Locking the keys
&
Press
H
, select FEATURES (
J
) and press
L
.
é
Select CHILD LOCK (
J
) and press
L
to set
the lock to ON.
“
Switch off the set and put the remote control
out of sight.
The set cannot be used (it can only be
switched on using the remote control).
‘
To cancel: switch CHILD LOCK to OFF.
• PICTURE
• SOUND
• FEATURES
• INSTALL
FEATURES
TIMER
• TIME
• START TIME
• STOP TIME
• PROG; NO;
• ACTIVATE
10:56
• PICTURE
• SOUND
• FEATURES
• INSTALL
FEATURES
• TIMER
• CHILD LOCK
• PARENTAL CONT
• ROTATION
ACCES CODE
- - - -
w
Check that the mode selector on the side of the remote control is set to TV.
