I.S.
ù
Ë
`
Ø
18
Connecting peripheral equipment
The television has 2 external sockets situated at the back of the set (EXT1 and EXT2).
The EXT1 socket has audio and video inputs/outputs and RGB inputs.
The EXT2 socket has audio and video inputs/outputs and S-VHS inputs.
Video recorder (only)
Carry out the connections featured opposite. Use a good
quality euroconnector cable.
If your video recorder does not have a euroconnector socket, the
only connection possible is via the aerial cable.You will therefore
need to tune in your video recorder's test signal and assign it
programme number 0 (refer to manual store, p. 6).
To reproduce the video recorder picture, press
0
.
Video recorder with decoder
Connect the decoder to the second euroconnector socket
of the video recorder.You will then be able to record
scrambled transmissions.
Video recorder
Satellite receiver, decoder, CDV, games, etc.
Carry out the connections featured opposite.
To optimise picture quality, connect the equipment which
produces the RGB signals (digital decoder, games, etc.) to
EXT1, and the equipment which produces the S-VHS
signals (S-VHS and Hi-8 video recorders, certain DVD
drives) to EXT2 and all other equipment to either EXT1
or EXT2.
&
Amplifier with analog input
Use an audio connecting cable and connect the
television’s “L” and “R” outputs to an “AUDIO IN” “L”
and “R” input on the amplifier.
é
Amplifier with coaxial digital input
Use a digital audio connecting cable and connect the
television’s “DIG OUT” output to a “DIG IN” input on
the amplifier.
“
Amplifier with optical digital input
Use an optical connecting cable and connect the
television’s “OPT OUT” output to an “OPT IN” input
on the amplifier.
The analog output corresponds to the sound of the image
displayed on screen, digital outputs only to the sound of the
DVD (you must activate the DVD’s digital output: see
preferential settings page 16).
Other equipment
Amplifier
To select connected equipment
Press the
N
key to select EXT1, EXT2, S-VHS2 (S-VHS signals
from the EXT2 socket) and EXT3 or S-VHS3 for connections on the
front panel.
Most equipment (decoder, video recorder) carries out the switching itself.
VCR
EXT 2
EXT 1
