4
Quick installation
Sorting programmes
The first time you switch on the television, a
menu appears on the screen and the tuning
starts automatically.
If the menu does not appear, hold down the
”
-
and
”
+ keys on the set for 5 seconds to start
the tuning.
The operation takes several minutes.
A display shows the search status and the
number of programmes found.When it has
finished the menu disappears.
To exit or interrupt the search, press the
H
key.
If no programmes are found, refer to the chapter
entitled Tips on p. 16.
&
If the transmitter or the cable network
broadcasts the automatic sort signal, the
programmes will be correctly numbered.
é
If not, the programmes found will be
numbered in descending order starting at 99,
98, 97, etc.
Use the SORT menu to renumber them.
Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.).
Where this is the case, make your choice using the
IJ
keys and confirm with
L
.
&
Press the
H
key.The main menu is displayed.
é
Select INSTALL (
J
), then press
L
.
The INSTALL menu appears.
“
Using the
J
key, select SORT then press
L
.
The SORT menu appears.The FROM option is
activated.
Note: this menu works as follows:
• Change "FROM" (enter the current programme
number),
• "TO" (enter the new number),
• EXCHANGE numbers" (the operation is carried out).
‘
Select the programme you wish to renumber
using
KL
keys or
0
to
9
.
Example: to renumber programme 78 as 2
press
7 8
.
(
Select TO (using
J
key) and enter the new
number with
KL
keys or
0
to
9
(for the
example given, enter
2
).
§
Select EXCHANGE (
J
key) and press
L
.
The message EXCHANGED appears, the
exchange takes place. In our example,
programme 78 is renumbered as 2 (and
programme 2 as 78).
è
Select the option FROM (
I
key) and repeat
stages
‘
to
§
as many times as there are
programmes to renumber.
See also: EasyLink function below.
!
To exit from the menus, press
R
.
• PICTURE
• SOUND
• FEATURES
• INSTALL
INSTALL
• LANGUAGE
• COUNTRY
• AUTO STORE
• MANUAL STORE
• SORT
• NAME
FROM
TO
EXCHANGE
If the set is connected (by the EXT2 socket)
to a video equipped with the EasyLink
function, the language, country and channels
found are automatically transmitted to the
video recorder at the time of installation.A
message is displayed on-screen during loading.
The list of video recorder channels is then the
same as those of the set.
The EASY LINK setting in the OPTIONS menu
must be set to ON (default setting), see page 10.
EasyLink function
SELECT LANGUAGE
LANGUAGE
• ENGLISH
DANSK
NEDERLANDS
FINNISH
FRANCAIS
COUNTRY
AUSTRIA
BELGIUM
SWITZERLAND
GERMANY
DENMARK
SEARCHING
PLEASE WAIT
PROG. NO.
2
215.18 MHZ
