5
The keys on the remote control
Depending on the model, there are 2 different versions of the remote control.
To set the TV to standby mode.The red
indicator lights up.To switch the set back on,
press P
, P
or
to
.
Brings up the previous or following programme.
For direct access to programmes
For a 2-digit programme number, the second
digit must be entered before the dash disappears.
On certain programmes, the title of the programme
is displayed for a few seconds at the bottom of the
screen.
To adjust the sound level.
To disable or enable the sound.
To call up or exit from the menus. Use
and
to adjust.
The menus disappear automatically after 30 seconds
if no further command is given.
To retrieve the settings stored using the
PERSONAL menu (see p.4).
Press several times to select
EXT
sockets
(see p.7).
To select an automatic standby period (from 0
to 240 minutes).
To switch from
S T E R E O
(and
N I C A M
S T E R E O
) programmes to
M O N O
o r, fo r
bilingual transmissions, to choose betwe e n
D U A L
f
and
D U A L
g
(and
NICAM DUAL
f
,
NICAM DUAL
g
and mono).
NICAM is a process by which sound is
transmitted as a digital quality.
Hold down for 5 seconds to permanently
display the programme number. Press quickly to
display or remove the programme number, the
time and the sound mode.
Press:
To obtain:
Standby
Select
Programme
Numerical
Keys
Volume
Mute
Menu
Favourite
pages.
Select EXT
sockets
Timer
Sound Mode
(stereo models
only)
Screen
Information
(stereo models
only)
Screen
Format
(Only available on
certain models)
The
key allows the picture to be enlarged
vertically to get rid of the black bands around
cinema-format films.The
key allows the
picture to be compressed vertically (16:9
format).
L9 1871.1 GB 1/8 3/10/01 14:03 Page 5
