29
[Smart Power]
The power consumption for the Smart power mode is
defined by the Smart Picture setting in the TV Setup part.
[Off]:
The TV will start with Standard Smart Picture
setting, but the setting can be changed in the guest setup
mode.
[On]:
The TV will start with default Smart Picture setting
and Smart Picture setup and is not selectable in the guest
setup.
[Wake on LAN]
TV set can be switched ON via Ethernet cable by sending
a request from a server.
This feature should be used in combination with Low
power standby set to Green.
Note: This feature is designated to system integrators; do
not use this feature in standalone mode.
[Welcome message]
The settings from this submenu will allow you to
configure the welcome message, which is displayed at
every power ON.
[Display message]
[On]:
To enable the welcome message.
[Off]:
No welcome message
