Philips 274E5QDAB/00(AD) Service Manual Download Page 44

Page: 44 / 83

44 Meridian 5

12. DDC Instruction

General

DDC Data Re-programming

In case the main EEPROM with Software DDC which store all factory settings were replaced because a defect

repaired monitor’ the serial numbers have to be re-programmed.

It is advised to re-soldered the main EEPROM with Software DDC from the old board onto the new board if circuit

board have been replaced, in this case the DDC data does not need to be re-programmed.

Additional information about DDC (Display Data Channel) may be obtained from Video Electronics Standards

Association (VESA). Extended Display Identification Data (EDID) information may be also obtained from VESA.

1. An i486 (or above) personal computer or compatible.

2. Microsoft operation system Windows 95/98/2000/XP/WIN7.

3. LPT port driver “PORT95NT.exe” and EDID tool “VGASinglePort.exe”

4. EDID JIG (715GT034-B) x1,

5. LPT cable (male to male) x1, VGA cable x 1, power cable x 2

6. 12V DC power source

7. The monitor and the EDID data

12.1 Connect the ISP board, PC and monitor as follow:

12.2 Install the LPT drive

1. Double click the icon

to install the driver.

2. Restart the PC after the LPT driver installation.

Summary of Contents for 274E5QDAB/00(AD)




















































































Search results

Summary of Contents for 274E5QDAB/00(AD)

Reviews:

Related manuals for 274E5QDAB/00(AD)

Brands by name

Popular brands

Philips 274E5QDAB/00(AD), Service Manual

Search results

Summary of Contents for 274E5QDAB/00(AD)

Reviews:

Related manuals for 274E5QDAB/00(AD)

Brands by name

Popular brands