Philips 26HFL5008D/12 Installation Manual Download Page 34 | Manualshive

Page: 34 / 40

background image

33

7.

Welcome Logo

There are 2 Philips logos displayed at startup. The second logo can be replaced by a picture uploaded via USB.
File format: 1280 x 720.jpg file. The Welcome Logo is displayed only when Standby mode is set to “Green”.

Note: below timing values are approximate indications and can differ from the real situation!

Welcome Logo

1. Create graphics file: 1280 x 720 jpg file with the logo.
2. File name: WelcomeLogo.jpg (File name is case-sensitive)
3. Install TV channels and access the

Professional Settings

menu

a. Go to

Professional Settings

-> Professional Mode -> Set to ON

b. Go to

Professional Settings

->Power settings ->Low power standby -> Set to Green.

c. Go Store settings (Back in the root of Professional settings) -> Press OK and confirm that you want to store
the settings.

4. Power on the TV, insert a USB key in the side USB port (USB key must be formatted FAT32).
5. Enter the

Professional Settings

menu

a. Go to Clone/Upgrade -> Clone to USB -> Press OK to copy settings to USB key. After the ‘Done’ message
pops up remove the USB key.

6. Insert the USB key on your computer. Save the file with name:

WelcomeLogo.jpg

into the folder

Q554B\WelcomeLogo\

7. Insert a USB key in the side USB port and enter the

Professional Settings

menu

8. Go to: Clone/Upgrade -> Clone to TV -> Press OK to copy settings from USB to TV. The TV will load all settings and
reboot to activate the new settings.
9. After reboot please enter the Professional menu:
- goto

Professional Settings

-> Control Settings -> Welcome Logo -> Set to ON.

- goto

Professional Settings

-> Power Settings -> Low power standby -> Green. (If

Low power standby

= Fast

Welcome logo will not be shown).
10. Store all settings and check if the welcome logo is properly displayed. After this you can clone the settings from
TV to USB for future use in other TV sets.

Hotel Information

Any JPEG can be used for the Hotel information and triggered from consumer menu screen.
How to upload single page Hotel Info

1. Create a JPEG graphics file with maximum resolution 1920 x 1080.

2. File name: HotelInfo.jpeg (File name is case-sensitive).
3. Copy the file to the folder “Wallpaper” inside the TV cloning data folder (Q554B\Wallpaper\)
4. Insert the USB device into the TV
5. Enter the Professional menu
6. Go to Smart Clone

«
...
32
33
34
35
36
...
»

Summary of Contents for 26HFL5008D/12









































Reviews:

No comments

Related manuals for 26HFL5008D/12

Brand: Bang & Olufsen Pages: 44

Brand: Bang & Olufsen Pages: 28

Brand: Samsung Pages: 74

Brand: Palsonic Pages: 27

Brand: Element Pages: 28

Brand: Skyvue Pages: 52

Brand: GE Pages: 24

Brand: ProScan Pages: 26

Brand: Bush Pages: 29

Brand: Panasonic Pages: 40

Brand: Panasonic Pages: 36

Brand: Panasonic Pages: 71

Brand: Panasonic Pages: 38

TX-21FG50M-SINGAPORE

Brand: Panasonic Pages: 29

Brand: Panasonic Pages: 28

Brand: Panasonic Pages: 30

Brand: Panasonic Pages: 54

Brand: Panasonic Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands