CHANNEL
Before you begin:
Make sure the unit is connected to antenna or cable.
1
Press
and use
to select
CHANNEL
, then press
OK
.
CHANNEL
Air/Cable
Auto Scan
Favorite
Channel List
Show/Hide
Channel Number
Channel Label
Cable
Move
Select
Adjust
Back
2
Adjust the following items.
Air/Cable
Select signal type.
1
Use
to select
Air/Cable
, then use
to select the item.
Air
When
Air
is selected, the TV detects any Off-
the-Air antenna signals. It searches for ATSC
(Digital) and NTSC (Analog) channels available
in your area.
Cable
When
Cable
is selected, the TV detects signals
supplied by cable. It searches for ATSC (Digital),
NTSC (Analog) and Cable channels available in
your area.
Auto Scan
Be sure the RF cable is correctly connected to this unit and you are
registered with your cable TV provider when you install cable
channels.
1
Use
to select
Auto Scan
, then press
OK
.
Auto Tuning
Analog
Digital
RF CH
Found
Please press MENU key to exit
Ɣ
When the scanning and memorizing of available channels is
completed, the lowest memorized channel will be displayed.
Note(s)
Ɣ
After setting
Auto Scan
, using
CH + / –
skips unavailable channels
automatically.
Ɣ
If you are not receiving a signal from your cable service, contact the cable
provider.
Ɣ
If you press
or
during auto scan, the setup of TV channels will be
cancelled.
Ɣ
Even if
Auto Scan
is completed, the channel setting will be lost if the AC
power cord is unplugged before the unit goes into standby mode by
pressing
.
Ɣ
The PIN code will be required once you set a PIN code in the
Child and
ratings lock
p.
25
.
Ɣ
If you want to change your PIN code, follow the instruction for
Change
Password
p.
25
.
23
.
English
Continued on next page.
