Watching channels from an external
device
Switching each input mode can easily switch with the remote control
between TV and external devices when they are connected to the
unit.
1
Turn on the set-top box or the connected device.
䐟
Press
SOURCE
and use
to select the set-top box or the
connected device and wait a few seconds till the picture appears.
Source Select
TV
Video
HDMI1
HDMI2
MULTIMEDIA
Move
Select
Back
䐠
Use the remote control of the set-top box or the connected device
to select channels.
Sleep timer
Sleep timer can set the unit to go into standby mode after an
incremental period of time.
Press
SLEEP
repeatedly to change the amount of
time (increases the time by 5 minutes up to 240
minutes).
Press
SLEEP
once to call up the display for checking the remaining
time.
Ɣ
To cancel sleep timer, press
SLEEP
Repeatedly until
Off
is
displayed.
Switching audio mode
Digital TV operation
1
Press
SAP
to display the currently selected language.
2
Press
SAP
repeatedly to cycle through the available audio
languages.
7.1
KGO-HD
THE VIEW FROM THE BAY
CC
TV-G
720p Audio 1/3
20XX/XX/XX XX:XX
CC
HD
Good
English
French
Spanish
Note(s)
Ɣ
Available languages differ depending on the broadcast.
Ɣ
Other
is displayed when the audio language cannot be acquired or the
acquired languages are other than English, French or Spanish.
Cable / NTSC (Analog) TV operation
1
Press
SAP
to display the currently selected audio mode.
2
While receiving an MTS broadcast, press
SAP
repeatedly to cycle
through the available audio channels.
e.g.) When all audio modes are available
Stereo
Mono
SAP
Stereo
:
Outputs stereo audio
Mono
:
Outputs mono audio
SAP
:
Outputs a second audio program
5 min
17
.
English
Continued on next page.
