Add a satellite
You can add an additional satellite to your current
satellite installation. The installed satellites and their
channels stay untouched. However, some satellite
operators do not allow adding a satellite.
The additional satellite should be seen as an extra, it
is not your main satellite subscription or not the main
satellite of which you use its channel package.
Typically, you would add a 4th satellite when you
have 3 satellites already installed. If you have 4
satellites installed, you might consider removing one
first to be able to add a new satellite.
Settings
If you currently have only 1 or 2 satellites installed, the
current installation settings might not allow adding an
extra satellite. If you need to change the installation
settings, you must redo the complete satellite
installation. You cannot use
Add satellite
if a change
of settings is needed.
To add a satellite . . .
1. Press
and select
Setup
and press
OK
.
2. Select
Search for satellite
and press
OK
.
3. Select
Add satellite
and press
OK
. The current
satellites are shown.
4. Select
Add
and press
OK
. The TV will search for
new satellites.
5. If the TV has found one or more satellites,
select
Install
and press
OK
. The TV installs the
channels of the found satellites.
6. To store the channels and radio stations,
select
Finish
and press
OK
.
Remove a satellite
You can remove one or more satellites from your
current satellite installation. You remove the satellite
and its channels. However, some satellite operators
do not allow removing a satellite.
To remove satellites . . .
1. Press
and select
Setup
and press
OK
.
2. Select
Search for satellite
and press
OK
.
3. Select
Remove satellite
and press
OK
. The current
satellites are shown.
4. Use the arrows keys to select the satellite you
want to remove.
5. Press
OK
to mark a satellite to remove. Press
OK
again to unmark.
6. Select
Remove
, press
OK
and confirm. The
satellites are removed.
7. Select
Exit
and press
OK
to close Remove satellite.
Manual Installation
Manual Installation is intended for expert users.
You can use Manual Installation to quickly add new
channels from a satellite transponder. You need to
know the frequency and polarization of the
transponder. The TV will install all channels of that
transponder. If the transponder was installed before,
all its channels - the former and the new ones - are
moved to the end of the channel list All.
You cannot use Manual installation if you need to
change the number of satellites. If this is needed, you
have to do a complete installation with Install
Satellites.
To install a transponder…
1. Press
and select
Setup
and press
OK
.
2. Select
Satellite settings
and press
OK
.
3. Select
Channel installation
>
Manual
installation
and press
OK
.
4. If you have more than 1 satellite installed,
select
LNB
for which you want to add channels.
5. Set the
Polarisation
you need. If you set
the
Symbol Rate Mode
to
Manual
, you can enter
the symbol rate in
Symbol Rate
manually.
6. Press the arrows
(up) or
(down) to adjust
the frequency, and select
Done
.
7. Select
Search
and press
OK
. The signal strenght
is shown on screen.
8. If you want to store the channels of a new
transponder, select
Store
and press
OK
.
Languages and audio
Preferred languages and subtitles
Satellite channels can hold different audio languages,
subtitle languages or Text languages. You can set the
TV to automatically switch to the language, subtitle
language or Text language you prefer, if this language
is available on the channel or Text pages.
To set the your preferred language . . .
1. Press
and select
Setup
and press
OK
.
2. Select
Satellite settings
and press
OK
.
3. Select
Languages
and press
OK
. Select the setting
you want.
4. Press
, repeatedly if necessary, to close the
menu.
Audio description
Speakers / Headphones
You can select where you want to hear the audio
commentary. On the TV speakers only, on the
headphones only or on both.
31
Summary of Contents for 24PFK5211
Page 5: ...5 ...
Page 61: ...Index 61 ...
