Philips 247E4QHAD/00, Service Manual

Page: 92 / 106

!
92 Meridian 3
Vsync Positive/Negative
Composite sync TTL level, input impedance 2.2k ohm terminate (Positive/Negative)
Sync on green video 0.3 Vp-p Negative (Video 0.7 Vp-p Positive)
2). DVI-D Digital
Input signal: Single TMDS link (Three channels: RX0-/+, RX1-/+, RX2-/+)
3) HDMI ( option , refer to Quick specification table)
Follow HDMI 1.4 specification
4). MHL
The MHL specification is an HD video and digital audio interface optimized for connecting
mobile phones and portable devices to displays(Monitor/TV) and other home entertainment
products. It features a single cable with a 5-pin interface able to support up to 1080p HD video
and digital audio while simultaneously providing power to the mobile device.
TMDS channel:
¾
Carries audio, video and auxiliary data.
¾
Signaling method: According to DVI 1.0 specification.
Single-link (Type A HDMI).
¾
Video pixel rate: 25 MHz to 165 MHz (Type A)
¾
Pixel encodings: RGB 4:4:4, YCbCr 4:2:2, YCbCr 4:4:4.
¾
Audio sample rates: 32 kHz, 44.1 kHz, 48 kHz
¾
Audio channels: 2.
DDC channel:
¾
Allows source to interrogate capabilities of sink.
¾
I²C signaling with 100 kHz clock.
¾
E-EDID data structure according to EIA/CEA-861D and
VESA Enhanced EDID.
Content protection:
According to High-Definition Content Protection (HDCP)
Specification 1.10.
HDMI video input should support timing defined in CEA 861-D
specification with extended EDID blocks
Video Timing Support :
Format Resolution Type Vertical frequency
480p 720 x 480 SD 60Hz
576p 720 x 576 SD 50Hz
720p 1280 x 720 HD 50Hz , 60Hz
1080i 1920 x 1080 HD 50Hz , 60Hz
1080p 1920 x 1080 HD 50Hz, 60Hz
MHL Timing:
Format Resolution Type Vertical frequency
480p 640 x 480 SD 60Hz
480p 720 x 480 SD 60Hz
576p 720 x 576 SD 50Hz
720p 1280 x 720 HD 50Hz , 60Hz
x
Picture centering - H & V
”
0.5 %. (for TV, 480i/p, 576i/p, 720p, 1080i/p)