Philips 231B4LPYCB/00, Service Manual, Page: 93 / 100

ʳ
93 Meridian 2
x Base / Pedestal to be Flame Retardant UL 94-HB.
x All major plastic parts (bezel, back cover) need to be molded from same resin.
x
Plastic resin type selection should be referred to “plastic-Philips Pool monitor”.
ʳ ʳ
5.12 Texture/Glossing of housing
x The texture area and texture no should follow Philips make-up sheet.
x The exterior surfaces shall have a uniform texture.
x Philips must approve the mold texturing.
x Detail document for texture refer to “UN-D249”, “UN-D 600”.
x < = 20 gloss units
5.13 Tilt and swivel base
x Tilt angle : -5 q +2/- 0 q (forward)
+20 q + 0/- 3 q (backward)
x Swivel angle : nil
x High Adjustment : nil
x Portrait Display : nil
ʳ ʳʳʳʳʳʳʳʳʳʳ
5.14 Kensington Lock
x Must meet Kensington_slot.spec “TYE-M0004”.
x MMD request metal plate in Kensington hole.
5.15 Label
x Regulatory label / Carton label should follow Philips requirement.
x China RoHS label
x Detail document refer to Philips Engineering Reference Book.
5.16 Product dimension / Weight ( Refer to Philips approved SHT 191/SHT560 )
x Unit dimension :
x Packed unit dimension:
x
Net weight :
x Gross weight :
5.17 Transportation
Transportation standards refer to UAN-D1534/00/01/02.
5.17.1 Transportation packages
x Net weight Packaging and wrapping shall be sufficient to protect the product against damage
or loss during shipment from the supplier to the destination specified in the purchase order.