values, the network ID or network frequency, enter
these values when the TV asks for them during
installation.
Channel Number Conflicts
In some countries, different TV channels
(broadcasters) might have the same channel number.
While installing, the TV shows the list with channel
number conflicts. You need to select which TV
channel you want to install on a channel number with
multiple TV channels.
DVB settings
Access DVB settings
To access DVB settings...
1. Press
, select
Antenna/cable installation and
press OK.
2. Enter your PIN code if necessary.
3. Select
Search for channels
and press
OK
.
4. Select
Re-install channels
, and press
OK
.
5. Select the country where you are now and
press
OK
.
6. Select
Cable (DVB-C)
.
7. Select
Digital and analogue channels
,
Only digital
channels
, or
Only analogue channels
, and press
OK
.
(Items will be differenct depends on the country you
select)
8. Select
Start
to search channels, or select
Settings
for DVB-C settings.
9. After setting, select
Done
to save the settings.
10. Press
BACK
to close the menu.
Frequency scan
Select the method of searching for channels. You can
select the faster
Quick
method and use the
predefined settings used by most cable providers in
your country.
If this results in having no channels installed or if
some channels are missing, you can select the
extended
Full
method. This method will take more
time to search for and install channels.
If you received a specific network frequency value to
search for channels, select
Advanced
.
Network frequency mode
If you intend to use the fast
Quick
method
in
Frequency scan
to search for channels,
select
Automatic
. The TV will use 1 of the predefined
network frequencies (or HC - homing channel) as
used by most cable providers in your country.
If you received a specific network frequency value to
search for channels, select
Manual
.
Network frequency
With the
Network frequency mode
set to
Manual
,
you can enter the network frequency value received
from your cable provider here. To enter the value,
use the number keys.
Frequency step size
The TV searches for channels in steps of
8MHz
.
If this results in having no channels installed or if
some channels are missing, you can search in smaller
steps of
1MHz
. Using the 1MHz steps will take more
time to search for and install channels.
Symbol rate mode
If your cable provider did not give you a
specific
symbol rate
value to install the TV channels,
leave the
Symbol rate mode
setting on
Automatic
.
If you received a specific symbol rate value,
select
Manual
.
With the
Symbol rate mode
set to
Manual
, you can
enter the symbol rate value by using the number
keys.
Network ID
You can enter the network ID value by using the
number keys.
Digital channels
If you know your cable operator is not offering digital
channels, you can skip searching for digital channels.
Analogue channels
If you know your cable operator is not offering
analogue channels, you can skip searching for
analogue channels.
Free / Scrambled
If you have a subscription and a CAM - Conditional
Access Module for pay TV services, select
Free +
scrambled
. If you did not subscribe to pay TV
channels or services, you can select
Free
channels only
.
42