EN 12
2
Use your TV
Watch TV
Switch TV on or off
Switch the TV on
Press the power switch on the TV.
If the TV is in standby, press on the
remote control.
Note:
There is a short delay before the TV
responds.
Tip:
If you cannot find your remote control
and want to switch on the TV from standby,
press
CH +/-
on the TV.
Switch TV to standby
Press on the remote control.
The remote control sensor on the TV
switches to red.
Switch off the TV
Press on the TV.
The TV switches off.
Note:
Though your TV consumes very little
energy when it is in standby or switched off,
it does use some energy. If you are not going
to use the TV for an extended period of
time, disconnect the TV from the mains plug.
Automatic switch off
You can save energy with this TV's energy
efficiency settings. The settings are enabled
by default, so that if there is no user
interaction (such as pressing a remote
control button or a control on the rear
panel) for four hours, the TV will
automatically switch to standby.
To disable automatic switch off
1. While you watch TV, press the
Green
button
on the remote control.
2. Select
[Auto switch off]
, then press
OK
.
3. Use the
Navigation buttons
to make a
selection, then press
OK
.
Adjust TV volume
Increase or decrease the TV volume
Press
+/-
on the remote control.
Press
+/-
on the side of the TV.
Mute or unmute the TV volume
Press
on the remote control to
mute the volume.
Press
again to restore the volume.
Adjust headphone volume
1. Press >
[Setup]
>
[TV settings]
>
[Sound]
.
2. Select
[Headphone volume]
, then press
OK
.
Summary of Contents for 22PFL3557H/12
Page 1: ...EN User Manual Register your product and get support at www philips com welcome 22PFL3557H 12 ...
Page 43: ...EN 43 English Connect the computer to the TV with a VGA cable and an audio cable ...
Page 59: ... 2012 TP Vision Netherlands B V All rights reserved Document order number 123557122133 ...