Philips 222EL2SB/00, Service Manual

Page: 64 / 92

ʳ
ʳ
ʳʳʳʳʳ
ʳ
ʳ
ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ˃ˁ˄ 222E2 21.5” Wide FHD LCD Monitor
2010/02/05 PHILIPS 10 of 30
64 222EL2 LCD
General Product Specification
User mode
1. Can save those timing that not in Preset mode and can be showed (not over
scalar or Panel spec.)
2. It needs to reserve the 10 timings space in memory size.
3.3.1 Mode storing capacity
Factory preset modes : 12
Preset modes : 46(VGA)/46(DVI)
User modes : 10
NOTE
Κ
VGA timing table:
1 For V-Freq is 85 HZ, The message “THIS IS 85HZ OVERSCANOVERDRIVE, CHANGE COMPUTER
DISPLAY INPUT TO 1920 x 1080@60HZ”is shown on screen.
2 when the input signal is out of range, the message “CANNOT DISPLAY THIS VIDEOMODE, CHANGE
COMPUTER DISPLAY INPUT TO 1920X1080@60 HZ” is shown on screen.
3 For Timing 960x720 @ 60HZ, OSD information shows 1280X720@60HZ.
4 For Timing 1400x1050@60HZ, OSD information shows 1680X1050@60HZ.
5 For Timing 1400x1050@75HZ, OSD information shows 1680X1050@75HZ.
6 The Timings (Green color highlighted) are factory preset mode (12 Sets).
7 Total 46 Sets
DVI timing table:
1. When input signal is DVI or HDMI, the recommend timing shown in OSD message should be timing
1920X1080@60R (pixel clock =148.5MHZ), not1920X1080@60,because this model do not support timing
1920x1080@60 (pixel clock =173MHZ) under DVI or HDMI.
2. Total 46 Sets
3.3.2 Factory preset modes (12 modes)
z
Factory modes and preset modes are defined in the enclosed timing table file
˅˅˅˘˟˅˲̇˼̀˼́˺˲̇˴˵˿˸
ˁ̋˿̆