Philips 221P3LPYEB/00, Service Manual

Page: 116 / 122

!
116 Meridian 3
5.12 Texture/Glossing of housing
y
The texture area and texture no should follow Philips make-up sheet.
y
The exterior surfaces shall have a uniform texture.
y
Philips must approve the mold texturing.
y
Detail document for texture refer to “UN-D249”, “UN-D 600”.
y
<= 20 gloss units
5.13 Tilt and swivel base
y
Tilt angle: -5
q
+2/- 0
q
(forward)
+20
q
+ 0/- 3
q
(backward)
y
Swivel Angle nil
y
High Adjustment nil
y
Portrait Display nil
5.14 Kensington Lock
y
Must meet Kensington_slot.spec “TYE-M0004”.
y
MMD request metal plate in Kensington hole.
5.15 Label
y
Regulatory label / Carton label should follow Philips requirement.
y
China RoHS label
y
Detail document refer to Philips Engineering Reference Book
5.16 Product dimension / Weight (Refer to Philips approved SHT191/ SHT560)
y
Unit dimension:
y
Packed unit dimension:
y
Net weight:
y
Gross weight:
5.17 Transportation
Transportation standards refer to UAN-D1534/00/01/02.
5.17.1 Transportation packages
x
Net weight Packaging and wrapping shall be sufficient to protect the product against damage
or loss during shipment from the supplier to the destination specified in the purchase order.
All packaging materials are subject to test and evaluation per UAN-D1534/00/01/02.
x
The cushion material shall be constructed using EPS material.
x
The doggy hole is requested
5.17.2 Transportation Test
Overall tests refer to UAN-D1534/00/01/02.
Vibration, drop test should be performed at ambient temperature (20°C to 23oC) and relative humidity
(40% to 65%).