Philips 220V3AB/00, Service Manual

Page: 72 / 84

220V3 LCD 71
0.1 220V3 series 22”W LCD Monitor
2011/08/31 PHILIPS 71 of 25
x China RoHS mark requested.
5.12 Plastics flammability
x All Plastics to be Flame Retardant UL 94-HB or Better.
x Base / Pedestal to be Flame Retardant UL 94-HB.
x All major plastic parts (bezel, back cover) need to be molded from same resin.
x
Plastic resin type selection should be referred to “plastic-Philips Pool monitor”.
5.13 Texture/Glossing of housing
x The texture area and texture no should follow Philips make-up sheet.
x The exterior surfaces shall have a uniform texture.
x Philips must approve the mold texturing.
x Detail document for texture refer to “UN-D249”, “UN-D 600”.
x < = 20 gloss units
5.14 Tilt and swivel base ( Refer to Quick Specification table )
5.15 Kensington Lock
x Must meet Kensington_slot.spec “TYE-M0004”.
x MMD request metal plate in Kensington hole.
5.16 Product dimension / Weight ( Refer to Philips approved SHT 191/SHT560 )
5.17 Transportation
Transportation standards refer to UAN-D1534/00/01/02.
5.17.1 Transportation packages
x Net weight Packaging and wrapping shall be sufficient to protect the product against damage
or loss during shipment from the supplier to the destination specified in the purchase order.
All packaging materials are subject to test and evaluation per UAN-D1534/00/01/02.
x The cushion material shall be constructed using EPS material.
x
The doggy hole is requested.
5.17.2 Transportation Test
Overall tests refer to UAN-D1534/00/01/02
.
Vibration, drop test should be performed at ambient temperature (20°C to 23
o
C) and relative
humidity (40% to 65%).
A. Transportation test specification for all regions
x Package test
1. Random Vibration test