Philips 220V3AB/00, Service Manual

Page: 4 / 84

4 220V3 LCD
Technical Data
SEC
Type NR. : SEC LTM220MT05
Resolution : 1680x1050
Outside dimensions
: 493.7(H) *320.1(V) * 17 (D)
mm(Typ.)
Pitch (mm) : 0.282mm x 0.282mm
Color pixel
arrangement
: 1680 horizontal By 1050 vertical
PVV9C ixels. RGB stripe
arrangement.
Display surface
: Hard coating (3H), Anti-glare
treatment of the front polarizer
Color depth
: 16.7 M colors 6-bit with H-FRC,
16.7M colors
Backlight : 2CCFL
Active area (W x H) : 473.76mm x 296.10mm
View angle (CR=10) : >=160 Right/Left (Typ)
: >=160 Up/Down (Typ)
Contrast ratio : >=700:1 (Typ)
White luminance : 250 cd/m2(Typ. Center 1 point)
Gate IC
: LDI
Color gamut : >=72%
Response time : 5 ms (Typ)
Scanning frequencies
Hor.: 30 – 60 K Hz
Ver.: 56 - 63 Hz
Video dot rate: < 210 MHz for VGA and < 170 MHz for DVI
Power input: 90-264 V AC, 50/60 r 2 Hz
Power consumption: Normal on: < 30 W (max)
Functions:
(1) D-SUB analog R/G/B separate inputs, H/V sync
separated, Composite (H+V) TTL level, SOG sync.
(2)SOG sync: a. Sync select: H + V b. Sync select: SERR
(3) DVI digital Panel Link TMDS inputs, HDCP supported.
A
mbient temperature: 0 q C - 40 q C
Power input connection
Power cord length : 1.5 M
Power cord type : 3 leads power cord with protective earth plug.
Power management
Mode HSYNC VSYNC Video Pwr-cons. Indication
Power-On On On Active
<25W (typ.)
< 32W(max.)
CCFL(220V3)
<30W (typ.)
< 37W(max.)
CCFL(220V3A)
Standby Off Off Blanked < 0.5W
Blinking white
LED
Period 3ec
on, 3sec off
DC Power
Off
N/A < 0.5 W LED Off
PIN No. SIGNAL PIN No. SIGNAL
1 Red 9 DDC +3.3V or +5V
2 Green/ SOG 10 Logic GND
3 Blue 11 Sense (GND)
4 Sense (GND) 12 Bi-directional data
5 Cable Detect (GND) 13 H/H+V sync
6 Red GND 14 V-sync
7 Green GND 15 Data clock
8 Blue GND
Susceptibility of display to external environment
Operating
- Temperature : 0 to 40 degree C
- Humidity : 80% max
- Altitude : 0-3658m
- Air pressure : 600-1100 mBAR
Storage
- Temperature : -20 to 60 degree C
- Humidity : 95% max
- Altitude : 0-12192m
- Air pressure : 300-1100 mBAR
Note: recommend at 5 to 35 q C, Humidity less than 60 %
Pin No. Description
1 T.M.D.S. data2-
2 T.M.D.S. data2+
3 T.M.D.S. data2 shield
4 No Connect
5 No Connect
6 DDC clock
7 DDC data
8 No Connect
9 T.M.D.S. data1-
10 T.M.D.S. data1+
11 T.M.D.S. data1 shield
12 No Connect
13 No Connect
14 +5V Power
15 Ground (for +5V)
16 Hot plug detect
17 T.M.D.S. data0-
18 T.M.D.S. data0+
19 T.M.D.S. data0 shield
20 No Connect
21 No Connect
22 T.M.D.S clock shield
23 T.M.D.S. clock+
24 T.M.D.S. clock-