EN-9
ENGLISH
FRANÇAISE
ESP
AÑOL
3.
Using a cross-head (Phillips Screw) screwdriver
(not supplied) to unscrew the four bolts that
secure the Monitor stand.
4.
Firmly pull the stand from the bottom of the
Monitor. Keep both the stand and bolts in a
secure location for future reinstallation.
Step 3 Connect cables
Connect the antenna cable, AC power cord, and
all other devices to the back of the Monitor as
described in the following sections and in
Section 7
Connect devices.
Step 4 Secure the VESA-compatible wall
bracket to the Monitor
B
Warning
2QO\XVHWKHVSHFLÀHGEROWV0[PP
to secure the VESA-compatible wall
EUDFNHWWR\RXU0RQLWRU7KHVSHFLÀHG
bolts are designed to match the weight of
your Monitor.
D
Note
Depending on your VESA-compatible wall
bracket, you may need to separate the mounting
plate from the wall bracket for easier installation.
Refer to your VESA-compatible wall bracket
documentation for instructions.
75x75 mm
Step 1 Purchase a VESA-compatible wall
bracket
According to the size of your Monitor screen,
purchase one of the following wall brackets:
Monitor
screen size
LQFKHV
VESA-compatible
wall bracket type
PLOOLPHWHUV
Screw type
19” / 22”
75 x 75mm
Metric 4 x
10mm
Step 2 Remove the Monitor stand
D
Note
These instructions are only applicable to Monitor
with TV tuner models with mounted stands. If
your Monitor stand is not mounted, skip to
Step
3 Connect cables.
1.
Carefully place the Monitor face down on a flat,
stable surface that is covered by soft cloth. The
cloth should be thick enough to protect your
screen.
2.
Pull up the lid that cover the Monitor stand.
