Philips 220BL2CB/00 Service Manual Download Page 82

Page: 82 / 90

ʳ
ʳ

ʳʳʳʳʳ
ʳ
ʳ

ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ˃ˁ˄

220B2 22” Wide 16:10 LCD Monitor

2010/02/10 PHILIPS 29 of 29

220BL2 LCD

General Product Specification

REGULATORY COMPLIANCE

10.1 Worldwide

Regulatory

˧ˬ˘ˀ˔˃˃˃ˇʳ˟˖˗ʳ

ˠ̂́˼̇̂̅ʳ˔̃̃̅̂˵˴̇˼̂́ʳ

10.2 EMC Requirements

Supplier DVT EMI test result must be submitted prior to DVT samples delivery, and PVT EMI test result

must be submitted again prior to PVT samples delivery, which also has to meet Philips' immunity

testing specification.

10.3 RoHS

Restriction on the use of certain hazardous substances.

Lead, Cadmium, Mercury, Hexavalent Chromium, Polybrominated Bipheny1 (PBB) and Polybrominated

Bipheny1 Ether (PBDE)(flame retardant).

10.4 WEEE

Producers (Philips) responsible for retailer take back schemes and recycling.

--System implemented.

--Collection and recycle targets.

10.5 Ongoing Regulatory

There's a possibility that other regulatory certificates will be required during the life of the product. It

is the responsibility of the supplier to provide related documentation.

Summary of Contents for 220BL2CB/00



























































































Search results

Summary of Contents for 220BL2CB/00

Reviews:

Related manuals for 220BL2CB/00

Brands by name

Popular brands

Philips 220BL2CB/00, Service Manual

Search results

Summary of Contents for 220BL2CB/00

Reviews:

Related manuals for 220BL2CB/00

Brands by name

Popular brands