Philips 220BL2CB/00, Service Manual

Page: 11 / 90

220BL2 LCD 11
0HFKDQLFDO,QVWUXFWLRQ
Preparation before disassemble
1. Clean the room for disassemble
2. Identify the area for monitor
3. Check the position that the monitors be placed and the quantity of the monitor; prepare the area for material flow;
according to the actual condition plan the disassemble layout
4. Prepare the implement, equipments, and materials as bellow:
Press-fixture
1) working table 2) Screw-driver 3)knife*1 4)Glove 5)Cleaning cloth 6) ESD protection
item picture Operation Tool Notes
1 Tear off four piece of
Mylar
Disassemble the stand
Æ
4 screws
Screw-dri
ver
2 disassembly the bezel from
the monitor, notice the
disassembly order :
1.Top (1) parts of bezel
2.Left (2) parts of bezel
3.Bottom (3) parts of bezel
4. Right (4) parts of bezel
Don’t draw the BZL
When disassembly
the bezel ,
notice don’t bend
the C/B .
man must wear
glove
The purpose is
loose the BZL
3 Turn over the monitor ,
Bring the Rear cover from
the monitor
Don’t dismantle the
Rear cover
4 Draw the AC Switch cable
out power board
Tear off four Piece of acetic
tape on the bottom of
Panel
disassembly the speaker
1
2
3
4