6
EN
Manual TV channel search
In some cases it can occur that all TV channels
are not found and saved during the first installa-
tion. In this case, the missing TV channels must
be searched for and stored manually.
1.
1.
Press
. The main menu will appear.
2.
2.
Select 'TUNER SET UP' with
and confirm with
.
3.
3.
Select 'MANUAL TUNING' with
and confirm with
.
4.
4.
Select 'PROG.' with
. Then
press
.
5.
5.
With
or
, select the
desired programme number that you want to
use for the TV channel, e.g. 'P01'. Then press
.
6.
6.
Select 'CHANNEL' with
,
and confirm with
. Then enter the
desired channel with
.
When a channel is found,it will stop searching. If
this is the channel you want, press
. If
you set 'SKIP' on for a channel, this channel will
be ignored when going through the channels
with or .
To search for other TV channels, begin again at
step 4.
7.
7.
To end, press
.
Using the satellite receiver
You can receive channels from the satellite
receiver via the scart socket
.
To do this, select the channel number 'AV1' by
pressing 0,0,1, with the keys
on the remote
control.You will have to select the channel you
want to receive on the satellite receiver itself.
Automatic Tuning
During installation, all available TV channels are
searched for and saved. If the channel assign-
ments of your cable or satellite TV provider
change or if you are reinstalling the TV-Video
Combi, e.g. after moving house, you can start
this procedure again. This will replace the TV
channels already saved with the new ones.
1.
1.Press
. The main menu will appear.
2.
2.Select 'TUNER SET UP' with
and confirm with
.
3.
3.Select 'AUTO TUNING' with
, and confirm with
.
4.
4.The automatic TV channel search starts. This
allows the TV-Video Combi to save all avail-
able TV channels. This procedure may take
several minutes.
5.
5.When the TV channel search is complete,
'AUTO TUNING COMPLETED' will briefly
appear on the TV screen.
FWD
1
-
B
STOP
C
-
L
PLAY
B
-
K
FWD
1
-
B
STOP
C
-
L
PLAY
B
-
K
MENU
0..9
AV1/EXT1
STATUS/EXIT
PROG P–
PROG P+
FWD
1
-
B
0..9
FWD
1
-
B
STOP
C
-
L
PLAY
B
-
K
FWD
1
-
B
0..9
STOP
C
-
L
PLAY
B
-
K
FWD
1
-
B
STOP
C
-
L
PLAY
B
-
K
FWD
1
-
B
STOP
C
-
L
PLAY
B
-
K
FWD
1
-
B
STOP
C
-
L
PLAY
B
-
K
MENU
What is a special channel?
TV channels are transmitted in certain pre-defined
frequency ranges. These ranges are divided into
channels.
A specific frequency/channel is assigned to each
TV station.
Certain frequency ranges are specified as special
channels (hyperband channels).
I don't know the channels for my TV stations
In this case, press
in 'CHAN-
NEL' to start the automatic channel search. A
changing channel number will appear on the TV
screen. Continue the automatic search until you
have found the desired TV channel.
STOP
C
-
L
PLAY
B
-
K
PLEASE WAIT
START
FINISH
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
MANUAL TUNING
→
PROG.
P55
CHANNEL
055
DECODER
[OFF]
SKIP
[OFF]
VIDEO MODE
[SECAM]
AUDIO MODE
[DK]
SELECT
K L
CHOOSE
B
END=EXIT
How do I change 'VIDEO MODE' or 'AUDIO
MODE'?
If you want to change the video or audio mode,
select 'VIDEO MODE' or 'AUDIO MODE' with
. Then, press
to
select your desired mode.
FWD
1
-
B
STOP
C
-
L
PLAY
B
-
K
T6400EZ-BG/DK(EN).qx3 03.4.21 15:51 Page 6
