manualshive.com logo in svg

Philips 202P70, Electronic User'S Manual, Page: 35 / 142

Share
Download
Philips 202P70 Electronic User'S Manual Download Page 35

Frequently Asked Questions

49.   Why is there no picture on my monitor even though the power LED is green?

 

●

     

Verify the Contrast and Brightness setting of the monitor. First press and hold the 

5

 

(-) button to increase Contrast and then press and hold the 

4

 (+) button to increase 

Brightness. These buttons are located on the front of your monitor.

●

     

Press both the 

5

(-) button and the OK button at the same time to switch input A|B.

●

     

Try and repeat step 48 above.

 

  

50.   Why does the picture disappear after I press the on/off button quickly?

 

This is a unique Philips feature designed to preserve the life of your monitor. Please allow 5 seconds 
between powering off and on your monitor, your picture will then be restored.

 

 

file:///D|/EDFU/crt_19_6/edoc/english/FAQ.HTM (15 of 15)2005-08-10 ¤U¤È 01:05:20

Summary of Contents for 202P70















































































































































Reviews:

No comments