manualshive.com logo in svg

Philips 202P70, Electronic User'S Manual, Page: 2 / 142

Share
Download
Philips 202P70 Electronic User'S Manual Download Page 2

Safety & Troubleshooting

Safety and Troubleshooting Information

Safety Precautions and Maintenance

 • 

Troubleshooting

 • 

Regulatory Information

 • 

Other 

Related Information

Safety precautions and maintenance 

WARNING: Use of controls, adjustments, or procedures other than those 
specified in this documentation may result in exposure to shock, electrical 
hazards, and/or mechanical hazards. 

Read and follow these instructions when connecting and using your computer monitor:

 

●

     

Disconnect the monitor from the power supply if the monitor is not to be used for an 
extended period of time. 

●

     

Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The 
back cover should only be removed by qualified service personnel. 

●

     

Do not place objects on top of the monitor cabinet, objects could fall into vents or cover them 
and prevent proper cooling of the monitor's electronic devices. 

●

     

To avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain 
or excessive moisture.

 

●

     

Do not use alcohol or ammonia-based liquid to clean the monitor. If necessary, clean with a 
slightly damp cloth. Disconnect the monitor from the power supply before cleaning. 

●

     

When positioning the monitor, make sure the power plug and outlet are easily accessible.

 

Consult a service technician if the monitor does not operate normally when operating instructions of 
this manual are followed. 

 

RETURN TO TOP OF THE PAGE

file:///D|/EDFU/crt_19_6/edoc/english/202P/SAFETY/safety.htm2005-08-10 ¤U¤È 01:05:16

Summary of Contents for 202P70















































































































































Reviews:

No comments