Philips 200WS8FB/00, Service Manual

Page: 72 / 80

Horizontal Position
Vertical
Input Selection Analog(D-Sub), Digital (DVI-D)
Language See SKU
Phase
Phase/ Clock
Clock
Horizontal
More Settings
OSD Settings
Vertical
No Reset
Yes
Audio Option Stand-alone
(For selective model) Mute
Volume
Serial No.:
(Serial No.)
Timing Mode
Up/Down to Move, ok to Confirm
Reset - No: Exit
Yes: Auto adjustment for displaying timing mode and recall factory preset
7. ELECTRICAL SPECIFICATION
7.1 Power Specification
7.1.1
AC-DC converter
Input voltage 90- 264V
Frequency range 50/ 60
±
2 Hz
Inrush current Shall be less than the ratings of critical components
(including fuse, rectifiers and surge limiting device)
for all conditions of line in voltage.
Maximum power
consumption: <50W (Max) / <43W (Typ.)
7.1.2 Power Management
Mode HSYNC VSYNC Video Pwr-cons. Indication Rec. time
Power-On On On active < 50W
(<54W: for
audio model)
Green LED --
Off Off Off blanked < 1 W Amber LED < 5 s
DC Power
Off
N/A < 1 W LED Off
Remark: At first power on w/o signal LED will be orange bl message on screen.
7.2 Standard Test conditions
Unless otherwise specified, this specification is defined under the following conditions.
(1) Input signal : As defined in Timing table, 1680 x 1050
non-interlaced mode (1680X1050@60Hz 146.25MHz), signal
sources must have 75 ohm output impedance.
(2) Luminance setting : controls to be set to 300 nits with
72 200WS8 LCD