Safety and Troubleshooting Information
extreme cold.
●
In order to maintain the best performance of your monitor and use it for a longer lifetime,
please use the monitor in a location that falls within the following temperature and
humidity ranges.
❍
Temperature: 0-40°C 32-95°F
❍
Humidity: 20-80% RH
●
IMPORTANT:
Always activate a screen saver program during your application. If a still
image in high contrast remains on the screen for an extended period of time, it may leave
an 'after-image' or 'ghost image' on front of the screen. This is a well-known phenomenon
that is caused by the shortcomings inherent in LCD technology. In most cases, the
afterimage will disappear gradually over a period of time after the power has been
switched off. Be aware, that the afterimage symptom cannot be repaired and is not
covered under warranty.
Service:
●
The casing cover should be opened only by qualified service personnel.
●
If there is any need for any document for repair or integration, please contact with your
local service center. (please refer to the chapter of "Consumer Information Center")
●
For transportation information, please refer to "Physical Specifications".
●
Do not leave your monitor in a car/trunk under direct sun light.
Consult a service technician if the monitor does not operate normally, or you are
not sure what procedure to take when the operating instructions given in this
manual have been followed.
file:///E|/200CW8/200CW8 EDFU-07-08-16/lcd/manual/English/200CW8/safety/safety.htm(第 2/2 页)2007-8-16 15:05:51