Philips 2000 PURO/VAPORE, Service Manual

Page: 47 / 67

3) Insert the BLACK WATER INLET SLEEVE BREW
UNIT assembly, in the boiler pin
Proceed as follows for perform the Steam-out.
Stimulate Micro door
Insert the BLACK WATER INLET SLEEVE BREW UNIT assy
(cod. 20000440 12NC 996530009825) in the silicon tube as
in the Picture. (silicon tube cod. JS01.022)
In
TEST MODE
brew 250/500cc of water to cool down the boiler temperature and discharge the
inner pressure.
1) Open the service door
2) Extract the Brew-unit
Steam-Out in Philips 2000 and XSmall Puro (without steam tube)
500mm length in the silicon tube O 5x10
When the buttons are released the machine shows Led Calc Clean flashing.
Press coffee button to start the steam-out proccess.
When the steam out procedure is completed the “double coffee” Led lights up and the “Calc Cle-
an” Led switch OFF.
3
1
2
Insert the coffe ground drawer
Warning:
Insert the silicone tube
into a container because
steam is released
Start the machine in SteamOut mode by pushing the COFFEE button and the ON-OFF button, and
then connecting the machine to the plug.
As long as the buttons are pressed the machine shows all LEDS ON: Led Activity, Led Double Cof-
fee, Led Alarm, Led NO_Water, Led CalclClean.
3) Insert the BLACK WATER INLET SLEEVE BREW
UNIT assembly, in the boiler pin
Proceed as follows for perform the Steam-out.
Stimulate Micro door
Insert the BLACK WATER INLET SLEEVE BREW UNIT assy
(cod. 20000440 12NC 996530009825) in the silicon tube as
in the Picture. (silicon tube cod. JS01.022)
In TEST MODE brew 250/500cc of water to cool down the boiler temperature and discharge the
inner pressure.
1) Open the service door
2) Extract the Brew-unit
Steam-Out in Philips 2000 and XSmall Puro (without steam tube)
500mm length in the silicon tube O 5x10
When the buttons are released the machine shows Led Calc Clean flashing.
Press coffee button to start the steam-out proccess.
When the steam out procedure is completed the “double coffee” Led lights up and the “Calc Cle-
an” Led switch OFF.
3
1
2
Insert the coffe ground drawer
Warning:
Insert the silicone tube
into a container because
steam is released
Start the machine in SteamOut mode by pushing the COFFEE button and the ON-OFF button, and
then connecting the machine to the plug.
As long as the buttons are pressed the machine shows all LEDS ON: Led Activity, Led Double Cof-
fee, Led Alarm, Led NO_Water, Led CalclClean.
3) Insert the BLACK WATER INLET SLEEVE BREW
UNIT assembly, in the boiler pin
Proceed as follows for perform the Steam-out.
Stimulate Micro door
Insert the BLACK WATER INLET SLEEVE BREW UNIT assy
(cod. 20000440 12NC 996530009825) in the silicon tube as
in the Picture. (silicon tube cod. JS01.022)
In TEST MODE brew 250/500cc of water to cool down the boiler temperature and discharge the
inner pressure.
1) Open the service door
2) Extract the Brew-unit
Steam-Out in Philips 2000 and XSmall Puro (without steam tube)
500mm length in the silicon tube O 5x10
When the buttons are released the machine shows Led Calc Clean flashing.
Press coffee button to start the steam-out proccess.
When the steam out procedure is completed the “double coffee” Led lights up and the “Calc Cle-
an” Led switch OFF.
3
1
2
Insert the coffe ground drawer
Warning:
Insert the silicone tube
into a container because
steam is released
Start the machine in SteamOut mode by pushing the COFFEE button and the ON-OFF button, and
then connecting the machine to the plug.
As long as the buttons are pressed the machine shows all LEDS ON: Led Activity, Led Double Cof-
fee, Led Alarm, Led NO_Water, Led CalclClean.
PHI 2000 PURO/VAPORE 05 SERVICE MODE
13/14
5.3 Steam Out PHI 2000 PURO
This document describes the procedure of SteamOut in PHI 2000 Puro machine. This application is
used in order to empty the heater.
500mm length in the silicon tube Ø 5x10
In TEST MODE brew 250/500cc of water to cool down the boiler temperature and discharge the
inner pressure.
Start the machine in SteamOut mode by pushing the COFFEE button and the ON-OFF button, and
then connecting the machine to the plug.
As long as the buttons are pressed the machine shows all LEDS ON: Led Activity, Led Double Coffee,
Led Alarm, Led NO_Water, Led CalclClean.
When the buttons are released the machine shows Led Calc Clean flashing.
Press coffee button to start the steam-out proccess.
When the steam out procedure is completed the “double coffee” Led lights up and the “Calc Clean”
Led switch OFF.
1) Open the service door
2) Extract the Brew-unit
3) Insert the BLACK WATER INLET SLEEVE BREW UNIT
assembly, in the boiler pin
Insert the BLACK WATER INLET SLEEVE BREW UNIT assy
(cod. 20000440 12NC 996530009825) in the silicon tube as
in the Picture. (silicon tube cod. JS01.022)
Warning:
Insert the silicone tube into
a container because steam
is released
Stimulate Micro door
Insert the coffe ground drawer