77
TPM1.0U LA
8. Alignments
8.1.3.2
Check grayscale
Apply
32
gray pattern.
Check the color poor & noise condition of
32
gray pattern
8.1.4. HDMI mode display adjustment
8.1.4.1 White Balance adjustment (B)
General set-up :
Equipment Requirement: Minolta CA-110 or Equivalent Color analyzer
Quantum Data Pattern Generator 802BT or 881
Input requirements:
Input Signal Type
: HDMI signal
1. 1080i mode, full white pattern.
2. Select Smart picture to
Personal
mode and check the x, y data.
Input Signal Strength : 4 channels TMDS signal
Input Injection Point : HDMI1 input.
Alignment method:
Initial Set-up:
1. Select source as "
HDMI1
"
.
2. Set Smart picture as "
Personal
" and to be Contrast =
50
(LPL)
,
Brightness=
50
(LPL)
, at normal menu mode.
3. Apply full white pattern by Quantum Data signal generator.
4. Enter factory mode menu: press MENU + Numeric keys "062596" + MENU key
(FAC
mode menu)
. Then select "Factory" item.
Alignment:
1. Set color temperature to "NORMAL".
2. Copy CLR_TEMP_R, CLR_TEMP_G and CLR_TEMP_B values from "NORMAL"
color temperature in Analog TV mode. Check whether (x,y) color coordinates meet
"NORMAL" color specification below. If color coordinates are out of specification, fine-
tune CLR_TEMP_R, CLR_TEMP_G and CLR_TEMP_B values. Then store those
values to NVM.
3. Set color temperature to "WARM".
4. Copy CLR_TEMP_R, CLR_TEMP_G and CLR_TEMP_B values from "WARM"color
temperature in Analog TV mode. Check whether (x,y) color coordinates meet
"WARM" color specification below. If color coordinates are out of specification, fine-
tune CLR_TEMP_R, CLR_TEMP_G and CLR_TEMP_B values. Then store those
values to NVM.
5. Set color temperature to "COOL".
6. Copy CLR_TEMP_R, CLR_TEMP_G and CLR_TEMP_B values from "COOL" color
temperature in Analog TV mode. Check whether (x,y) color coordinates meet "COOL"
color specification below. If color coordinates are out of specification, fine-tune
CLR_TEMP_R, CLR_TEMP_G and CLR_TEMP_B values. Then store those values to
NVM.
Color temperature Normal/Warm/Cool (x, y) co-ordinates specification:
Picture Mode
x
y
Normal (8500
o
K)
0.291
±
0.0
10
0.302
±
0.0
10
WARM (6500
o
K)
0.314
±
0.0
10
0.324
±
0.0
10
COOL( 11500
o
K)
0.273
±
0.0
10
0.280
±
0.0
10
8.1.5. DTV (ATSC) mode display adjustment
8.1.5.1 White Balance adjustment (B)
General set-up :
Equipment Requirement: Minolta CA-110 or Equivalent Color analyzer.
ATSC signal generator - Sencore ATSC997 or equivalent generator
Input requirements:
Input Signal Type
: RF signal
1.Set center frequency=69MHz, playing transport stream with white pattern.
2. Select Smart picture to
Personal
mode and check the x, y data.
Input Signal Strength : 60 dBuV
Input Injection Point : RF input
Alignment method:
Initial Set-up:
1. Select source as "
TV
"
.
2. Set Smart picture as "
Personal
" and to be Contrast =
50
(LPL)
,
Brightness=
50
(LPL)
, at normal menu mode.
3. Apply white pattern by ATSC997 signal generator.
4. Enter factory mode menu: press MENU + Numeric keys "062596" + MENU key
(FAC mode
menu)
. Then select "Factory" item.
Summary of Contents for 19PFL5402D/27
