Philips 19PFL3404D, User Manual

Page: 24 / 43

22
Access decoder channel
You can map channels provided through a
decoder or descrambler to your TV channel
selection. In this way, you can select these
channels by using the RC of your TV. The
decoder or a descrambler must be connected
to EXT1 (SCART).
Set decoder channel
Map channels from a decoder or descrambler
1
Press MENU .
2
Press to select [Setup] >
[Installation] > [Preferences] >
[Decoder] .
3
Press OK or to enter [Decoder] menu
.
4
Press to select [Channel] and press
OK or to enter.
A list of analogue channels appears on
»
the screen.
5
Press to select one channel to map
to the decoder/descrambler channel and
press
OK to confirm.
6
Select [Status] and press OK or to
enter.
7
Press to select [EXT 1] (SCART)
the connector used by the decoder/
descrambler.
8
Press OK .
9
Press MENU to exit.
Start a TV demo
1
Press DEMO on the remote control.
2
Press to select a demo and press OK
to view it.
3
Press DEMO to exit.
Select • [Update now] to update the
software immediately.
Select
• [Remind me later] to exit the
update screen at that time and be
reminded later.
Select
• [Cancel] to skip the update.
2
If you select [Cancel] , you can manually
access the OAD update by selecting
[Setup] > [Software update] > [Local
updates] > [OAD] .
3
Select the available version of OAD and
press OK .
4
Follow the on-screen instructions to start
the update.
Note
The TV restarts after the software update is
•
complete.
Change TV preferences
1
Press MENU .
2
Press to select [Setup] >
[Installation] > [Preferences] .
3
Press OK or to enter [Preferences] .
• [Location] Optimises TV settings for
your location - home or shop.
• [Volume bar] Displays the volume
bar when adjusting the volume.
• [Channel info.] Displays information
about the TV channel every time you
switch channels. Select
[Full] to view
channel information or [Off] to turn
off the channel information.
• [EasyLink] Enables one-touch play
and one-touch standby between
EasyLink-compliant devices.
• [E-sticker] For shop mode only. Sets
the location of the e-sticker.
EN