Philips 19HFL2829P/12 Installation Manual Download Page 25

Page: 25 / 39

[Fixed Pic. Mode]

Feature to hide the picture menu icon
• Off: picture icon is displayed amongst all menus.
• On: picture icon is hidden

[Boot Up Picture Mode]

The picture setting loaded at startup. Based on user preference this can be changed
between few presets: Off, Dynamic, Natural, Cinema, Game, Sports

[Digital Tuner]

• Off: only analog channels are available
• On: digital channels are available together with analogue channels.

[Multiple RC support]

Feature to enable the Multi RC.
• Off: feature is disabled
• On: feature is enabled and shows which RC is set

[Welcome Screen]

Feature to show a welcome screen at startup
• On: a welcome screen is shown
• Off: a welcome screen is hidden

[NIT Update]

If this option is enabled LCN information’s will be updated automatically. This
option is available only for Nordic countries.

Recommended action is to disable NIT table.

Summary of Contents for 19HFL2829P/12








































Search results

Summary of Contents for 19HFL2829P/12

Reviews:

Related manuals for 19HFL2829P/12

Brands by name

Popular brands

Philips 19HFL2829P/12, Installation Manual

Search results

Summary of Contents for 19HFL2829P/12

Reviews:

Related manuals for 19HFL2829P/12

Brands by name

Popular brands