Philips 19B4LPCB/00, Service Manual

Page: 69 / 87

ġ
ġ
ġ
ġ
19B4LP LCD 69
ġ
ġġġġġġ
ġ
ġ
ġġġġġġġġġġġġġġġġġġġġġ
0.1 M4 19S4 / 19B4 19” 5:4 LCD Monitor
2011/11/10 PHILIPS 69 of 18
3.10 Display Port
3.11 USB support
(option, refer to Quick specification table)
Connect the upstream port of the monitor to host PC’s USB port via USB cable. Then attach external
device to the downstream port of the monitor. Check if the device can work properly.
3.12 DDC /CI Support and SmartControl
In accordance with VESA DDC/CI, the monitor should be workable with Philips SmartControl and
Portrait Display Tune at least.
3.13 Pivot function
(option, refer to Quick specification table)
It needs to support AUTO PIVOT function with SmartControl PC application tool.
3.14 Hot-key definition
(refer to M4 OSD button definition)
3.15 Smart Image
ġġġġġġġġġġġġġġġġġġġġġ
ŔŮŢųŵŊŮŢŨŦġőųŰŧŪŭŦġ
ŅŦŧŪůŪŵŪŰůŴĩŎĴĪ
ġ
3.16 PerfectTune II
(formerly FGA, FACTORY GAMMA Alignment)
A. PerfectTune must be done after warming 30 minutes at least.
B. PerfectTune must be performed after Auto Color.
C. PerfectTune must be conducted through DVI or scalar embedded patterns.
D. Delta E < 2.5
3.17 PowerSensor
(option, refer to Quick specification table)
őŰŸŦųġŔŦůŴŰųġ
ŇŶůŤŵŪŰůŢŭġœŦŲŶŪųŦŮŦ
3.18 Smart Power (option)
Reduce the power by adjusting backlight, contrast and color.
Algorithm is provided by Supplier.
3.19 SmartResponse (not required for M4 models)
To enhance the Response time when Gary to Gary.
When SmartResponse= on, Response time = 2 mSec (typ.)
OD will only work after 3 frames pass to pretend user see side effect.
When smart Image set to off and color temp set to User define, OD function will work immediately.