Philips 190V9FB/00(1) Service Manual Download Page 55

Page: 55 / 96

Great user manuals database on

UserManuals.info

HUDSON 9

14. DDC Instruction

General

DDC Data Re-programming

In case the main EEPROM with Software DDC which store all factory settings were replaced because a defect,

repaired monitor’ the serial numbers have to be re-programmed.

It is advised to re- soldered the main EEPROM with Software DDC from the old board onto the new board if

circuit board have been replaced, in this case the DDC data does not need to be re-programmed.

Additional information about DDC (Display Data Channel) may be obtained from Video Electronics Standards

Association (VESA). Extended Display Identification Data (EDID) information may be also obtained from

VESA.

1. An i486 (or above) personal computer or compatible.

2. Microsoft operation system Windows 95/98/2000/XP.

3. “ PORT95NT.exe, WinDDC_ setup” program.

4. Software OSD SN Alignment kits

The kit contents:

a. OSD SN BOARD x1

b. Printer cablex1

c. VGA cable x1

d. Digital cable x1

e. 12V DC power source

1. Install the “PORT95NT.EXE”, and restart the computer.

The process of installing “PORT95NT” has been specified in Item12, so it will not be specified again. If you

have any problem, please read it in Item12.

http://www.wjel.net

Summary of Contents for 190V9FB/00(1)

































































































Search results

Summary of Contents for 190V9FB/00(1)

Reviews:

Related manuals for 190V9FB/00(1)

Brands by name

Popular brands

Philips 190V9FB/00(1), Service Manual

Search results

Summary of Contents for 190V9FB/00(1)

Reviews:

Related manuals for 190V9FB/00(1)

Brands by name

Popular brands