background image

36

9. Troubleshooting & FAQs

corresponding companies’ web site. 
Install the driver. Remove SmartControl 
Lite, and re-install it once more.
If it is still not working, we are sorry that 
the graphic adaptor is not supported. 
Please visit Philips website and check if 
an updated SmartControl Lite driver is 
available.

Q4.    When I click on Product Information, 

only partial information is shown, what 
happened?

Ans.:

   It might be your graphic card adaptor 

driver is not the most updated version 
which fully supporting DDC/CI interface. 
Please try to download the most 
updated graphic adaptor driver from 
corresponding companies’ web site. Install 
the driver. Remove SmartControl Lite and 
re-install it once more.

Attention

Theft mode enabled

Q5.    I forgot my PIN for Theft Deterrence 

Function. What can I do?

Ans.:  

Philips Service center has a right to ask for 
legitimate identification and authorization, 
in order to establish ownership of the 
monitor.
Please note that the anti-theft deterrence 
function is provided as a convenient free 
option.  Managing PIN numbers is the 
sole responsibility of the individual user or 
the organization who sets it. In case the 
PIN number is forgotten,  Philips service 
center can re-set it for you at a nominal 
charge after verification of ownership. 
Please note that this activity is not 
covered by standard warranty terms.

9.3 General FAQs

Q1:    When I install my monitor what should 

I do if the screen shows 'Cannot display 
this video mode'?

Ans.:

   Recommended resolution for this 

monitor: 1920 x 1080 @ 60 Hz.

v

Unplug all cables, then connect your PC to 
the monitor that you used previously. 

v

In the Windows Start Menu, select Settings/
Control Panel. In the Control Panel 
Window, select the Display icon. Inside the 
Display Control Panel, select the 'Settings' 
tab. Under the setting tab, in box labelled 
'desktop area', move the sidebar to 1920 x 
1080 pixels.

v

Open 'Advanced Properties' and set the 
Refresh Rate to 60 Hz, then click OK. 

v

Restart your computer and repeat step 2 
and 3 to verify that your PC is set at 1920 
x 1080 @ 60 Hz. 

v

Shut down your computer, disconnect your 
old monitor and reconnect your Philips 
LCD monitor. 

v

Turn on your monitor and then turn on 
your PC.

Q2:    What is the recommended refresh rate 

for LCD monitor?

Ans.:

   Recommended refresh rate in LCD 

monitors is 60 Hz, In case of any 
disturbance on screen, you can set it 
up to 75 Hz to see if that removes the 
disturbance. 

Q3:    What are the .inf and .icm files on the 

CD-ROM? How do I install the drivers 
(.inf and .icm)?

Ans.:

   These are the driver files for your 

monitor. Follow the instructions in your 
user manual to install the drivers. Your 
computer may ask you for monitor 
drivers (.inf and .icm files) or a driver disk 
when you first install your monitor. Follow 
the instructions to insert the ( companion 
CD-ROM) included in this package. 

Summary of Contents for 190E3L










































Reviews: