18
4. PowerSensor
Power Sensor
3
How to adjust settings
If PowerSensor is not operating correctly inside or outside the default range, here’s how to fine-tune
detection:
v
Press the PowerSensor hot key.
v
You will find the default position ‘3’ on the adjustment bar.
v
Adjust the PowerSensor detection adjustment to Setting 4 and press OK.
v
Test the new setup to see if PowerSensor properly detects you in your current position.
Note
A manually selected PowerSensor mode will remain operational unless and until it is readjusted or the
default mode is recalled. If you find that the PowerSensor is excessively sensitive to nearby motion for
some reason, please adjust to a lower signal strength.
