Philips 190B5CB/00, Service Manual

Page: 25 / 83

25 190B5 LCD
Go to cover page
DDC Instructions
To Monitor
D-sub/DVI cable
To Printer port
Re-programming Digital DDC IC
Step 1: After initialize alignment box, connecting all cables and
box as shown in Fig. 23
Fig. 24
Step 2: Read DDC data from monitor
1. Click icon as shown in Fig. 24 from the tool bar to bring up
the Channels "Configuration Setup" windows as shown in Fig. 25.
Step 3: Modify DDC data (verify EDID version, week, year)
1. Click (new function) icon from the tool bar, bring up
Step 1 of 9 as shown in Fig. 27 .
EDID46 DDC application provides the function selection and
text change (select & fill out) from Step 1 to Step 9.
Step 4: Modify DDC data (Monitor Serial No.)
Next 1. Click , bring up Fig. 28.
2. Click , bring up Fig. 29. Next
3. Click OK button to confirm your selection.
4. Click icon (Read EDID function) to read DDC EDID data from
monitor. The EDID codes will display on screen as shown in Fig. 26.
Fig. 28
Fig. 29
2. Select the DDC2Bi as the communication channel.
As shown in Fig. 25.
Fig. 25
Fig. 26
Fig. 27
Fig.23
3
3=Power Plug
8 12v ~
Don't
close
this
scr
een.
--->
Select and fill out,
If necessary.