Philips 190B5CB/00, Service Manual

Page: 16 / 83

16
190B5 LCD
Go to cover page
Mechanical Instructions
Front View
Back View
Step1. Remove the base as shown in Fig. 3-4
-Remove the hinge cover
-Remove the six screws
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Step2. Remove the Front Bezel
-Remove the two screws as shown in Fig.5
-Use the thin " " screw driver to open the clicks as shown
in Fig.6-8.
Step3.Remove the BacK cover
- Remove the three threws as shown in Fig.9
- remove the five clicks as shown in Fig.9 and disconnect 1931 from
Audio-board and 1712 from Control-board
- Use the thin " " type screw driver to open the clicks as shown in
Fig.10
Step4. Remove the Matel frame board
- Remove the ten screws as shown in Fig.11
- Disconnect D-SUB & DVI hexagonal screws as shown in Fig.11
- Remove the matel frame board as shown in Fig.12
Fig.6
Fig.8
Fig.7
Fig.9
Fig.10
1931
1712
Fig.11