Philips 170X6FB/00, Service Manual

Page: 28 / 105

28
190X6&170X6 LCD
DDC Instructions
Go to cover page
To Monitor
D -sub/ D VI cable
DC 8 ~ 12 V
To Printer port
Re-programming Digital DDC IC
Step 1: After initialize alignment box, connecting all cables and
box as shown in Fig. 17
Fig. 18
Step 2: Read DDC data from monitor
1 . C lick icon as shown in Fig. 18 from the tool bar to bring up
the C hannels " C onfiguration Setup" windows as shown in Fig. 19 .
Step 3: Modify DDC data (verify EDID version, week, year)
1 . C lick (new function) icon from the tool bar, bring up
Step 1 of 9 as shown in Fig. 21 .
E D I D 45 DDC application provides the function selection and
text change (select & fill out) from Step 1 to Step 9 .
Step 4: Modify DDC data (Monitor Serial No.)
Next
1 . C lick , bring up Fig. 22 . Then select D igital Signal as below
3. C lick OK button to confirm your selection.
4. C lick icon (Read E D I D function) to read DDC E D I D data from
monitor. The E D I D codes will display on screen as shown in Fig. 20 .
Fig. 22
Fig. 2 3
2 . Select the DDC2 Bi as the communication channel.
As shown in Fig. 19 .
Fig. 19
Fig. 20
Fig. 21
Fig. 17
Printer
Port
To Monitor
To P C
1 = D VI connector
2 = D -SUB connector
3=Power Plug
3
D
on't
close
this
scr
een.
--->
To Monitor
D -sub/ D VI cable
DC 8 ~ 12 V
Select and fill out,
If necessary.
2 . C lick to step 7 , bring up Fig. 2 3.
Next
- Serial number can be filled up or be changed at this moment.
-
C lick Next, Finish to exit the Step window.