FAQs (Frequently Asked Questions)
Q:
How do I adjust the resolution?
A:
Your video card/graphic driver and monitor together determine the available
resolutions. You can select the desired resolution under Windows® Control Panel
with the "Display properties"
.
Q:
What if I get lost when I am making monitor adjustments?
A:
Simply press the OK button, then select 'Reset' to recall all of the original factory
settings.
Q:
What is the Auto function?
A:
The
AUTO adjustment
key restores the optimal screen position, phase and clock
settings by pressing of a single button – without the need to navigate through OSD
(On Screen Display) menus and control keys.
Note:
Auto function is available in selected models only.
Q:
My Monitor has no power (Power LED does not light up). What should I do?
A:
Make sure the AC power cord is connected between the monitor and AC outlet,
and click a key on keyboard/mouse to wake up the PC.
Q:
Will the LCD monitor accept an interlaced signal under PC models?
A:
No. If an Interlace signal is used, the screen displays both odd and even horizontal
scanning lines at the same time, thus distorting the picture.
Q:
What does the Refresh Rate mean for LCD?
A:
Unlike CRT display technology, in which the speed of the electron beam is swept
from the top to the bottom of the screen determines flicker, an active matrix display
file:///D|/EDFU/LCD/170C7/manual/english/170c7/safety/saf_faq.htm (2 of 8)2006-07-28 11:02:44 AM