background image

Manual installation

Searching for and storing TV channels is
done channel by channel. Also you can
assign a name to a TV channel with up to
5 letters or numbers.

You must go through every step

of

the manual programme menu.

&

Select 

Manual installation

in the

installation menu.

é

Press the 

OK

key to enter the Manual

installation menu.

Press the cursor left/right to select the TV
system of the country or part of the
world from where you want to receive the
TV channel.
If you are connected to a cable system,
select the TV system of your country or
part of the world you are now located.

DK

: PAL D/K, SECAM D/K (East Europe)

BG

: PAL B/G, SECAM B/G 

(Europe/East Europe/France)

I

: PAL I/II ( U.K./Ireland)

(if provided) (France)

Press the cursor up/down to select

Channel

.

(

Press the cursor left/right to select 

C-ch

for aerial channels or 

S-ch

for cable

channels.
If you know the C- (01-69) or S-channel
number (01-47), enter it directly with the
digit keys 0 to 9.

Ask for a list from your cable company or

dealer.

§

Press the cursor up/down to select

Search

.

è

Press the cursor left/right to start
searching. If a channel is found the search
will stop.

Fine tune

In case of poor reception, you can
improve the reception by fine tuning.
Press the cursor up/down to select 

Fine

tune

.

Press the cursor left/right to fine tune for
the best picture and sound.

Assigning a channel name

It is possible to change the name stored in
the memory or to assign a name to a TV
channel which has not yet been entered. A
name with up to five letters or numbers
can be given to the programme numbers 0
to 99.

Press the cursor up/down to select 

Name

.

Select the character with the cursor
left/right.
Space, numbers and other special
characters are located between Z and A.
Press the 

OK

key.

Select a following character.
Proceed with the following steps.

!

If the channel is the one required, press
the cursor up/down to select 

Store

.

ç

Press the cursor left/right to select a
channel number or enter the channel
number with the digit keys.

0

Press the 

OK

key to store the TV channel.

Repeat steps 4 to 10 to store another TV
channel.

Press the 

MENU

key repeatedly if you

want to exit the menu.

Automatic installation
Manual installation 
Reshuffle
Language

OK MENU

Manual installation

System

BG

Channel

S-ch/C-ch 

Fine tune

πππ

Search
Name

C 01

Store

oœ pπ

OK MENU

6

Installation

Summary of Contents for 15PF9925 - 15PF - 9925























Reviews: