Philips 15PF9925 - 15PF - 9925, Manual

Page: 17 / 22

&
Insert the plug into the headphone socket
L
at the back of the TV.
é
Press the
¬
key on the remote control to
switch off the sound from the headphone and
the internal loudspeakers of the TV.
“
Press the cursor left/right to adjust the volume.
Headphone
PC INPUT
w 1
•
••
•
••
S-VIDEO DC 12V
_
+
ANT IN
x
75 Ω
VIDEO (MONO) L AUDIO R
AV2
L
• •
............
...........
L
Monitor Display modes
MODE Resolution Horizontal Vertical
Frequency (KHz) Frequency (KHz)
VGA 640x480 31,5 KHz 60Hz
640x480 35 KHz 67Hz
640x480 37,9 KHz 72Hz
640x480 37,5 KHz 75Hz
640x480 43,3 KHz 85Hz
720x400 31,5 KHz 70Hz
SVGA 800x600 35,2 KHz 56Hz
800x600 37,9 KHz 60Hz
800x600 48,1 KHz 72Hz
800x600 46,9 KHz 75Hz
800x600 53,7 KHz 85Hz
(MAC) 832x624 49,7KHz 75Hz
XGA 1024x768 48,4KHz 60Hz
1024x768 56,5KHz 70Hz
1024x768 60,2KHz 75Hz
1024x768 68,7KHz 85Hz
Note:
- If the set is cold, there may be a small "flicker"
when the set is switched on. This is normal, there is
nothing wrong with the set.
- If possible, use the VESA 1,024x768@60Hz video
mode to obtain the best image quality for your
LCD monitor. If used under the other resolutions,
some scaled or processed pictures may appear on
the screen. The TV has been pre-adjusted to the
mode VESA 1,024x768@60Hz.
- Some dot defects may appear on the screen, like
red, green or blue spots. However, this will have no
impact or effect on the monitor performance.
- Do not press the LCD screen with your finger for a
long time as this may incur some afterimages.
Personal computer
PC INPUT
w 1
•
••
•
••
S-VIDEO DC 12V
_
+
ANT IN
x
75 Ω
VIDEO (MONO) L AUDIO R
AV2
L
• •
............
...........
&
Connect one end of a (male to male)
VGA cable to the video card of the
computer and the other end to the VGA
connector
PC INPUT
at the back of the
TV. Fix the connectors firmly with the
screws on the plug.
Note: the VGA cable is not supplied with the
TV.
é
In case of a Multimedia computer, connect
the audio cables to the audio outputs of
your Multimedia computer and to the
AUDIO L
and
R
connectors of the
AV2
input of the TV.
“
Press the
w
key on the remote control
or select
Source
in the Special menu (See
p. 12) to select PC.
‘
Switch on the computer.The TV can be
operated as the computer monitor.
Note: If you have an Apple Macintosh
computer, connect the VGA desktop block from
the 3 row 15 pin to 2 row 15 pin with the
signal cable and connect the VGA desktop
block to the Apple Macintosh computer.
17
Connect peripheral equipment