Troubleshooting
Vertical flicker appears
●
Perform the Auto function in OSD Main
Controls.
●
Eliminate the vertical bars using the Clock
Adjustment in OSD Main Controls.
Horizontal flicker appears
●
Perform the Auto function in OSD Main
Controls.
●
Eliminate the horizontal bars using the Phase
Adjustment in OSD Main Controls.
The screen is too bright or too dark
●
Adjust the contrast and brightness of
Management in OSD Main Controls. (The
backlight of the LCD monitor has a fixed life
span. When the screen becomes dark or
begins to flicker,
please contact your dealer).
An after-image appears
●
If an image remains on the screen for an
extended period of time, it may be imprinted
in the screen and leave an afterimage This
usually disappears after a few hours
An afterimage remains after the power
has been turned off.
●
This is characteristic of liquid crystal and is
not caused by a malfunction or deterioration
of the liquid crystal. The afterimage will
disappear after a period of time.
Green, red, blue, dark, and white dots
remains
●
The remaining dots are normal characteristic
of the liquid crystal used in today’s
technology.
For further assistance, refer to the
Consumer Information Centers
list and contact your local Philips
distributor.
RETURN TO TOP OF THE PAGE
file:///D|/My%20documents/dfu/150V5/english/150v5/safety/saf_troub.htm (2 of 3) [4/14/2004 11:08:59 AM]
